s2h's Blog

  • Advertise with us
This blog is written by s2h | 4 entries so far

Latest Entry

8" Woodtek Restore #2: Restore Complete. Or 95% Complete anyway

06-24-2013 01:30 AM by s2h | 3 comments »

This refurb was one of the biggest machines I have worked on that has a top speed of 0 mph. It took some months to complete due to the complete tear down painting and rebuild. Most every part had some sort of combination of rust, dirt, grease, and wood chips. The easy part was cleaning the table top. After that I had to remove the jointer cast iron top and base from the sheet metal stand. The stand was bent up, beat up and rusted and so down to metal for you. After some paint and reattaching the WoodTek logo on the front it looked much better. With the base restored and motor remounted (and rewired for 220) it was time to tackle the jointer proper. As you can tell from the...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics