rustynails's Forum Topics

  • Advertise with us
View rustynails's:homeworkshopprojects (13)blog (1)reviews (0)forum topics (107)buddies (71)favorites (1)activity logWatch
04-19-2019 01:11 PM

FS/ Air Compressor - 11 replies

I have a 5HP 60 gallon single phase 15 amp air compressor along with two hundred dollars’ worth of 75 ft. of industrial grade flexible hose, with wall mounts with 4 quick connect drops with one valve drop for clean out. The unit comes with a water separator and shut off valve and a extra long cord (about 35 ft) . This was used in my hobby shop a...

04-19-2019 12:39 PM

Lion Miter Trimmer - 1 reply

I have a Lion Miter Trimmer with the optional top trim attachment. Everything works great and the blades are very sharp. Sale Price $135.00

03-02-2019 03:06 AM

Chevalet For Sale - 21 replies

You don’t see’s these come up for sale but I am selling my Chevalet, I am down sizing and have never used this after I built it. If you look at my projects page you will see what it looks like . I made this out of solid Ash and if you look at the clamp area you can see it has never even been cut. Also In review if you look at the two...

02-11-2019 01:54 AM

3'' Gummed Veneer Tape Were To Buy? - 6 replies

I am looking for some wide water activated gummed veneer tape to use in veneering projects. I looked on the web but could only fine the standard 3/4’’ that I use and have. Anyone know of a good source or could recommend? Thanks

01-20-2019 12:28 AM

Kumiko, What Are The Best Books and Videos To Learn Buy? - 4 replies

I know Google is your friend but I thought for those that have done it or did the search on the topic before me could make some recommendations of books, videos or even a weekend class in Mid-Michigan that may help jump start my learning search with technics and jigs and the best ways to cut the parts. Thanks

12-04-2018 12:06 AM

Lacquer problem / White film on finish? - 6 replies

I have a problem; I just finished a piece which has black walnut and pine in the project. It was sanded and then just sprayed with Watco Crystal Clear Lacquer (spray can) which I have done a few times now with no problems. I like using this product as it dries fast and you can put multiple coats on in no time. Well this time it did not turn o...

11-06-2018 02:04 AM

Black Friday Multi-Router Sale - 18 replies

I Thought I would put this up for sale in time for Black Friday. I have a Multi-Router that I am selling. It is in excellent shape. The Mult-Router system has been recognized as one of the most creative tools in the woodworking industry. Precision built and easy to utilize, the system is incredible accurate, reliable, and repeatable, making it a...

10-02-2018 01:51 AM

F.S. / Drill Press / Delta 18-900L with laser - 4 replies

This press is in like new condition with very little use. This press has tons of designed features especially for woodworkers. It has an auto-tensioning belt drive system that allows for fast and easy speed changes along with 6 in of quill stroke, micro-adjustable depth stops, a red twin crosshair laser for point of bit contact, replaceable tabl...

07-31-2018 12:52 AM

Long Term Wood Veneer Storage / Climate Control? - 5 replies

I have a lot of veneer (about a pallet full) and have not had a problem with storing it as it has been in the basement at my house. (live in Michigan) But since I am in the process of downsizing I may not have a basement to store it in and I am concerned about storage and what the climate and temperature can do to the veneer. How are others stor...

07-18-2018 04:23 AM

For Sale Grizzly G1071-Oscillating Spindle Sander - 2 replies

This sander is in great shape and only used lightly. Here are the specifications from their web site. • Motor: Heavy-duty 1 HP, 120V/240V, single-phase, 12A/6A, prewired 120V• 25” x 25” cast-iron table tilts 45°L, 15°R• Ten spindle sizes: 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 1”, 1-1/2”...

07-18-2018 01:55 AM

For Sale/ Bandsaw / ShopSmith / New In Box - 4 replies

For Sale, brand new ShopSmith Bandsaw in box, never used or opened until pictures were taken. Comes with 2 new blades in packages. Also comes with optional stand for off-site storage. Save $$$$ from ordering new from factory… this would sell for $650.00 plus shipping… Best deal in town for a new one of these saws in a box. ...

07-17-2018 03:55 AM

For Sale Newer 510 ShopSmith - 5 replies

I am asking $375.00 for the unit. Lot of accessories still has the packing plastic still on and never used. Here is the listing and pictures on Craig’s list.

06-13-2018 11:08 AM

FS / WoodMaster Model 3875 Drum Sander - 11 replies

FS / WoodMaster Model 3875 Drum Sander I am selling my American made 38’’ drum sander. It is in great condition with very low hours on the machine. I am downsizing to a smaller shop. The sander is under power and can be tested. The sander has the optional reversing kit. This sander is a commercial grade machine but was only used in my hobby ...

05-09-2018 02:42 AM

Florip Toolworks and the Great Lakes Woodworking Festival. - 1 reply

Last weekend 5-6-18 / I had went to the 2nd annual Great Lakes Woodworking Festival in Adrian Mi. It was my first time to the festival and Adrian Mi. The event was a smaller wood working event with some seminars and venders. As I was reviewing the venders I ran into Erik from Florip Toolworks who is one of the members here at the forum. The iro...

03-30-2018 01:49 AM

FS /Rockwell-Delta Table Saw Inserts and Manuals - 1 reply

I have 3 inserts for a Rockwell-Delta Table Saw. One is for a regular saw blade, one is a dado insert and one is a molding head insert. All manuals and documents seen in pictures included. (Inserts from saw in manual) Sale price for everything $30.00 plus shipping. Can fit in a flat rate box.

03-25-2018 01:36 AM

FS/Pinnacle Story Stick, Brace, Kreg Drawer Jig, Jointech - 3 replies

For Sale I have a Pinnacle Story Stick with 4 extra metal marker/tabs 8 total (Pre WoodPecker) $30.00 Kreg drawer glide installation jig $15.00 Jointech feather board NOS still in package $10.00 Brace with 3 drill bits $15.00

02-26-2018 03:19 AM

WTB / The New Scroll Saw Basket Volume 1 & 2 by Monroe Dutcher - 1 reply

I am looking for the scroll saw basket books written by Monroe Dutcher. If you have either one or both that you would like to sell let me know. Thanks

12-07-2017 04:49 AM

Intarsia Craftsmen What Sanders Are You Using? - 4 replies

I am reviewing different pneumatic drum sanders for doing contour sanding. The two that are on my list are the Seyco sander and the Foredon variable speed bench lathe sander. They both run about the same price so that is not a factor. The Foredon has variable speed and would use an inflatable drum. The Seyco would come with flexible padded type ...

11-16-2017 10:03 PM

5’’ Sandpaper The best for Intarsia ? No Holes …. - 1 reply

I am going to try to do some Intarsia and have ordered one of these: (TORQ R5 Rotary Backing Plate with Hyper Flex Technology, Red (5 Inch) to do the edge and shaping work and am wondering what is the best sandpaper to use on this type of plate? The backing plate is hook and loop but do to the angles I am putting on the wood / work pieces I am n...

11-07-2017 11:29 PM

Bandsaw Box Blade Size? - 3 replies

What size blades are the best for cutting bandsaw boxes? Is a 3/16 4TPI thebest all around size to use? I have never made a box before and plan ontrying my hand at it and have read a few people saying they use this size. Whatis everyone using or recommending for a all around blade size. Thanks Richard 

1 2 3 4 ... 6 next »
107 topics

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics