rtbrmb's Blog

  • Advertise with us
This blog is written by rtbrmb | 1 entry so far

Latest Entry

Clamping Irregular Shaped Surface

01-19-2015 05:43 AM by rtbrmb | 3 comments »

I was working in the shop today trying to wrap up a pair of boxes I was making for my sister & niece. I was working on completing the lids and very near final construction of the boxes themselves. I wanted to put corner splines in the lid for decoration/reinforcement. My intent was to have them flush with the bottom of the lid. After I cut the slots for th splines & went to glue them together I realized the mistake I had made… to clamp the splines when I had already routered the profile into the lid edges. ^&$#@! After thinking for a while I got the idea that I could use a scrap piece of 1” dow foam on the bottom & it would compress to the shape...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics