LumberJocks

Windows 20

  • Advertise with us
Blog series by robscastle updated 05-10-2020 10:09 PM 5 parts 2186 reads 46 comments total

Part 1: There's life left in That there Window

04-21-2020 05:24 AM by robscastle | 19 comments »

Gents and Ladies, I have been using these sanding blocks after a friend who looks like Moses put me on to them. I was surprised that I had never crossed paths with them before. I am not spruiking any brands as they have no Manufacturers labels on them.After LBD educated me yet again off I went and I found the supplier by Googling 150mm disc sanding blocks on ebay. They are designed to accept a 150mm hook & loop type sanding disc, and believe it or not, the grit doesn’t matter…...

Read this entry »


Part 2: Not an out feed table

04-26-2020 02:15 AM by robscastle | 4 comments »

I am “fiddling about with some windows a friend Rob gave me. I have been trying to re purpose them for what might end up being a display case fro a friend Dave. The concept of the Display case design being 2 x windows at the front as the original design of the windows opening using euro hinges and then 1 x window at each side fixed and a filled in back all supported on a base with 4 x Legs and a top. Final design to be decided by Dave You may have seen my sanding effor...

Read this entry »


Part 3: sanding and repair work

05-01-2020 03:39 AM by robscastle | 9 comments »

I continued with the Silky oak windows over the past few days.sanded them all and got the surfaces ready With the initial damaged Window I Saw trimmed off all the edges and then realised later that there was not enough material left to make them look symmetrical, or possibly fit euro hinges so I set about enfilling the remaining window hinges recesses and replacing the material as opposed to sawing it off. This meant scraping all the paint out/off so I could glue pieces in. ...

Read this entry »


Part 4: The basic concept for the display cabinet

05-01-2020 03:40 AM by robscastle | 8 comments »

This is the basic concept for the display cabinet a structural ply base edged trimmed and add four legs. A solid back and top with again maybe some arty farty trim making it look like a Roentegen’s Bros Berlin cabinet https://www.youtube.com/watch?v=MKikHxKeodA Some euro hinges or maybe some long Guitar hinges not really sure yet I am going to put the putty side which is normally outside inside, then in reality it may look Art Decco at the very least.

Read this entry »


Part 5: The display cabinet s no more

05-10-2020 10:09 PM by robscastle | 6 comments »

I my mate Dave changed his mind regarding wanting a display cabinet. So I ceased work on the project, I pondered what to do with them and decided I had enough of them so was going to dump them but decided later to give them away. So as with most of my projects, they end up on the footpath or more correctly this time because I was concerned somebody might break the glass and add to my annoyance I leaned them up against the fence. Somebody dropped by, looked at them, then drov...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com