CFrye inspired Pizza Peel: Material rough sawing and edging

  • Advertise with us
Blog entry by robscastle posted 10-01-2016 08:38 AM 908 reads 0 times favorited 9 comments Add to Favorites Watch

I took the Pizza Peel out of the clamps, cleaned off the residue glue with a scraper and had a good look at it.

One of the sides.

And then the other side

It was flat enough to begin trimming it to size with the table saw.

The angle on the front is 15 degrees.

That will have to do for today….. need to run the wife around she just had a knee replacement operation.

-- Regards Rob

9 comments so far

View crowie's profile


3372 posts in 2557 days

#1 posted 10-01-2016 10:04 AM

Good man Rob, got to enjoy life and look after your best friend…

If I may…encourage your wife that once she’s got clearance to head for the hydrotherapy pool and get walking & cycling through the water.
It helps keep me mobile after a hip replacement and back issue, I go twice a week for 30-50min self managed sessions…

PS – Thanks for the blog on the clamps…..

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View Roger's profile


21030 posts in 3410 days

#2 posted 10-01-2016 03:33 PM

wow! Hope your wife heals up quick. One step at a time

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

View PhilBello's profile


411 posts in 2573 days

#3 posted 10-01-2016 06:42 PM

We’re all waiting for a slice of Pizza!!! ;-) Look forward to see your Wife running in the next Marathon!!

-- If you want the rainbow, you got to put up with the rain - Steven Wright

View Joe Lyddon's profile

Joe Lyddon

10864 posts in 4658 days

#4 posted 10-01-2016 07:27 PM

Very good…

Hope ur wife’s knee replacement is successful in the years to come…

This is not the finished Pizza PEEL is it?

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: ... My Small Gallery:

View CFrye's profile


10823 posts in 2446 days

#5 posted 10-02-2016 12:09 PM

I imagine the table saw is much faster than the belt sander for the beveled edge! She may not think so, but your wife’s knee looks great! 1+ on the hydro therapy!

-- God bless, Candy

View CFrye's profile


10823 posts in 2446 days

#6 posted 10-02-2016 12:14 PM

Could you post a shot of the end after the saw cut? I think the joints cut at an angle would be very interesting looking!

-- God bless, Candy

View a1Jim's profile


117908 posts in 4183 days

#7 posted 10-02-2016 01:06 PM

Looks like a cool project thanks for the blog Rob. before I read about you operation I first saw the photo of your knee I thought how in the world could you have a table saw accident on your knee :)) Just goes to show woodworkers always thinking woodworking.


View Mean_Dean's profile


7017 posts in 3753 days

#8 posted 10-04-2016 10:22 PM

Look’n good so far!

-- Dean -- "Don't give up the ship -- fight her 'till she sinks!" Capt James Lawrence USN

View robscastle's profile


6675 posts in 2810 days

#9 posted 10-05-2016 07:46 AM

Thanks for the welfare comments, words of wisdom and support for Aurora’s recovery.

The Pizza Peel is also progressing well too and hopefully will look even better soon!

P.S. No I was not using my knee as a push stick!!

-- Regards Rob

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics