robdem's Workshop

  • Advertise with us
Workshop by robdem posted 07-02-2012 11:30 PM 1700 reads 1 time favorited 10 comments Add to Favorites Watch

View all workshops »

View robdem's profile


381 posts in 3115 days

click the pictures to enlarge them

robdem's Workshop robdem's Workshop robdem's Workshop
robdem's Workshop robdem's Workshop robdem's Workshop

click the marker to see the address

Well finally getting around to adding my shop to this wonderful site been here little over a year don’t post much but look and read alot. My shop is in a one car garage 11×22 feet as you can see have cramed alot of stuff in the space . Have a grizzly hybrid table saw pruchased last year saw works great for my needs . Have a jet 14 inch bandsaw with riser block this was a steal that I purchased from craigs list 400 dollars . Also have HF dust collector with 4 inch pipe and hose run to all machines .Have a delta 6 inch joiner and a 12 inch delta bench top planer.Have a rockler router table with a dewalt 3 hp plunge router mounted in it. Have 16 inch ridgid drill press purchased from direct tools last year they were having a ridgid sale got the drill press for under 170 plus taxes .The shop is not big but I don’t make furniture or anything that large so it works for me more room would always be nice but I will take what I have and make the best of it .I a’m getting into making cutting board and candle holders and some picture frames also going to try making some band saw boxes .Thanks for looking any and all comments are welcome .

10 comments so far

View redryder's profile


2393 posts in 3611 days

#1 posted 07-03-2012 06:56 AM

You sound like a frugal tool shopper with a well stocked shop. I like the variety of projects you have posted. Keep it going…...............

-- mike...............

View dbhost's profile


5772 posts in 3741 days

#2 posted 07-03-2012 01:50 PM

You sure have a lot going on in that shop! Good going. Nice tool selection too. Everywhere you turn is something nice.

-- Please like and subscribe to my YouTube Channel

View robdem's profile


381 posts in 3115 days

#3 posted 07-18-2012 06:21 PM

Thanks for comments guys sorry for delay in answering been very busy at work . db looked at your shop not to shabby yourself lots of nice stuff in there. redryder like the mirror tou did very cool

View Alexandre's profile


1417 posts in 2700 days

#4 posted 07-18-2012 06:37 PM

Awesome! Nice workshop!
Any modifications you did to your HF dust collector?

-- My terrible signature...

View robdem's profile


381 posts in 3115 days

#5 posted 07-19-2012 10:27 PM

Alexandre no modifications to the dust collector just hooked it up ran the duct work and let the chips fly . Can’t beat it works great for what I do one machine at a time . thanks for looking

View Roger's profile


21011 posts in 3313 days

#6 posted 03-13-2016 06:51 PM

Nice shop there rob. I see you have the G0715P. Why did you chose this over the G01023? Just curious. $$$ difference? or what. Thnx in advance.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

View robdem's profile


381 posts in 3115 days

#7 posted 03-13-2016 07:08 PM

Roger thanks shop has changed a little have added some new tools and also made a plane till last summer . Guess I should update photos .

View helluvawreck's profile


32086 posts in 3376 days

#8 posted 03-13-2016 07:43 PM

It looks like a nice shop. Congratulations.

helluvawreck aka Charles

-- helluvawreck aka Charles,

View robdem's profile


381 posts in 3115 days

#9 posted 03-13-2016 10:22 PM

Thanks Charles it’s my little piece of heaven .

View a1Jim's profile


117722 posts in 4086 days

#10 posted 03-13-2016 11:28 PM

super shop,thanks for sharing.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics