richbutcher's Workshop

  • Advertise with us
Workshop by richbutcher posted 12-11-2014 12:15 PM 2381 reads 0 times favorited 12 comments Add to Favorites Watch

View all workshops »

View richbutcher's profile


5 posts in 2269 days

click the pictures to enlarge them

richbutcher's Workshop richbutcher's Workshop richbutcher's Workshop
richbutcher's Workshop richbutcher's Workshop richbutcher's Workshop

click the marker to see the address

Heres My shop. it 2200 sqft. itsa heated and insulated . I have a 3hp professional saw stop cabinet saw, a grizzly 6” jointer and a grizzly 15” helictical cutter planer.there is a delta 14” bandsaw,perfomax 22/44 drum sander,grizzly 12 baby drum sander. kreg router table, ridged belt/spindle sander, a 12 jet disc sander. I have 2 jet air cleaners on the ceilinf and 2 jet dust collectors. I have a ridged 12 sliding miter saw, a dewalt 12 miter saw and just picked up a bosch 12 gliding miter saw. there are 2 drill presses and a 10 radial arm saw. I have 2 smaller benches, ones on casters ,I generally build project off of horses and supports, that I can taylor to any size project. I prefer to have the big open space, I can pull my trailer in and load a project or unload material as needed.

-- richie b.

12 comments so far

View moke's profile


1681 posts in 3783 days

#1 posted 12-12-2014 06:29 PM

Nice shop, well designed and roomy!

-- Mike

View ShaneA's profile


7085 posts in 3605 days

#2 posted 12-12-2014 06:32 PM

nice set up

View Bobsboxes's profile


1544 posts in 3671 days

#3 posted 12-12-2014 07:52 PM

Great looking shop, nicely set up

-- Bob in Montana. Kindness is the Language the blind can see and deaf can hear. - Mark Twain

View changeoffocus's profile


467 posts in 2624 days

#4 posted 12-12-2014 08:17 PM

Very nice layout, is this below grade?
I ask that because of the steel beams.
That is one jumbo chop saw.

View timbertailor's profile


1594 posts in 2431 days

#5 posted 12-13-2014 12:15 AM

Look at all that dedicated space!

Very nice.

-- Brad, Texas,

View richbutcher's profile


5 posts in 2269 days

#6 posted 12-13-2014 06:36 AM

Thanks guys. Really appriciate it.hey bob,it’s not below grade ,those are 2 laminated beams.the barn was originally built to be a horse barn but previous owner never went that route.

-- richie b.

View whitebeast88's profile


4128 posts in 3197 days

#7 posted 12-20-2014 04:34 PM

great shop,love the space and well organized.

welcome to lumberjocks!!!

-- Marty.Athens,AL

View a1Jim's profile


118161 posts in 4584 days

#8 posted 12-20-2014 04:40 PM

That’s one fine shop Rich


View goggy's profile


74 posts in 4423 days

#9 posted 12-20-2014 09:38 PM

Nice shop neighbor. I’m your way when I need QSWO at back to nature oak.

View mbs's profile


1686 posts in 3947 days

#10 posted 12-22-2014 02:33 AM

That is a big shop! Great place to work with all your tools!

-- Sorry the reply is so long. I didn't have time to write a short reply.

View Lee A. Jesberger's profile

Lee A. Jesberger

6873 posts in 4986 days

#11 posted 12-23-2014 04:24 PM

Super looking shop!

Nice equipment to play with.


-- by Lee A. Jesberger

View ClayandNancy's profile


532 posts in 4022 days

#12 posted 12-23-2014 05:19 PM

I’m jealous. Nice shop and nice to see a Lumberjock in the Cleveland area. I’m in Chardon.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics