LumberJocks

Reviews: Laguna Tools

  • Advertise with us
back of split table higher than front when clamped down

back of split table higher than front when clamped down

06-02-2020 08:39 PM by mehloyellow | 7 comments »

I’m a hobbyist and look to this site often for advice and help. I used the positive reviews of this site and others to in buying my band saw. I have an issue with a Laguna 14bx-220v band saw that I purchased a few weeks ago and need some advice. I noticed that the back end of the split table was about 10 thousandths of an inch higher than the front when clamped down. (see attached picture) It’s enough to catch any thing being slid across the table when cutting. I read an old...

Read this review »


2HP C Flux dust collector

2HP C Flux dust collector

03-08-2019 10:35 PM by Jwhite2418 | 3 comments »

As I mentioned that I was going to buy a new dust collector which I did a year ago this month. I purchased Laguna’s 2HP C Flux cyclone dust collector. It came on a pallet in a very study box. No damage and everything was in there as advertised. The manual wasn’t as bad as some reviews have stated however there were a few items that were a bit unclear. I really don’t think there really is anything worth going over – you can figure it out. Anyway it does take ...

Read this review »


Laguna Tools 14/12 Review

Laguna Tools 14/12 Review

03-02-2019 10:31 PM by DMiller | 10 comments »

A little while ago I had the privilege to purchase one of Laguna’s 14/12 bandsaw, a saw I had been wanting to buy for the past several years. First off, as a sixteen year old woodworker I feel very privileged to own and be able to use this saw; I really appreciate my customers who have purchased wood products from me and ultimately provided me the saw. Second, I had been watching craig’s list for quite a while for one of these- people just don’t like to sell them though! ...

Read this review »


Disappointed by this lathe

Disappointed by this lathe

09-28-2018 06:04 AM by cathyb | 44 comments »

One month ago my Laguna 18/36 lathe arrived and I was excited. My previous lathe was from General Tools. It did not have any bells or whistles, but it was a dependable workhorse and I wish I had that lathe now. These are the problems I have experience so far with the Laguna: 1. If dust or small chips get wedged in the banjo clamp handle it will not lock in place. Take the time to brush off the dust and get the dang thing to hold in position on the bed. Really? 2. Same problem w...

Read this review »


Laguna 14-12 Short & Sweet

Laguna 14-12 Short & Sweet

03-08-2018 09:25 PM by Andybb | 5 comments »

For some reason I’m not bright enough to figure out how to add a second episode on a blog so I’ll just post this separately. Youtube reviewWell, finally got around to opening and assembling today. Can’t really say I had any issues. After watching and reading everything on this saw for months I knew what documented issues I had seen so I was on the lookout. I saw none of them. Here was the process.1. Assemble while following the Laguna videos. (Per a video I saw I loo...

Read this review »


Laguna 14|12 - Great Saw with fantastic customer service to back it up

Laguna 14|12 - Great Saw with fantastic customer service to back it up

01-20-2018 06:35 AM by BoardsByBullard | 16 comments »

Late in December I started to look into a few options for improving the shop, I was tossing ideas around getting a few more Festool toys and I realized I was quickly outgrowing my Craftsman 1hp 14” band saw. I was looking for a reasonably priced saw with more power and I saw that my local Rockler was not only running a special for 10% off Laguna products but that they also had the 14|12 in stock. I was strongly considering the 220v 14bx as a solid option but realized that the break was ...

Read this review »


Laguna - Great Product!

Laguna - Great Product!

12-30-2017 08:44 PM by Rebarn | 9 comments »

We have had our Laguna bandsaw for about two years now. We use it mostly for resawing medium to small stock. We use the Resaw King carbide tip blade. All I can say is that this is a great saw and the Resaw King blade is remarkable!

Read this review »


Design features miss the mark

Design features miss the mark

04-22-2017 12:35 PM by EarlS | 11 comments »

Laguna C Flux 1.5 HP Dust Collector – 3 Stars – it provides good air flow and suction with 2 stage filtration. The rest of the design misses the mark. Earlier this spring, I ordered a Laguna C Flux, 1.5 HP dust collector ($1000) from Rockler with direct shipping from Laguna. After 2 weeks of waiting for a shipping confirmation I called Rockler and they said they would check on a delivery date. A week later and still no response so I called and e-mailed Laguna directly and sp...

Read this review »


Laguna fusion table saw

Laguna fusion table saw

01-28-2017 01:34 AM by Hermit | 20 comments »

I’ve had this saw about a month now. It’s a major step up for me being out of woodworking for 20 plus years. Having just built my shop, this is my first major tool purchase second to a dust collector. I’m basically starting all over again.I did a lot of research, read a lot of reviews etc as others have done. I chose this saw for several reasons. 1. Great reviews on multiple websites.2. Appears to be good enough for an almost retired hobbiest. 3. Dust collection port on the ...

Read this review »


Laguna customer service

Laguna customer service

12-12-2016 11:55 PM by Bill Commerford | 18 comments »

I have had the Laguna 14/12 bandsaw for just over a year and have had no issues with it. Saturday I was cutting some wet wood into turning blanks and burned up the drive belt. Monday morning I called Alex at Laguna customer service to order a new on, expecting to pay for it. Alex asked if I had registered it and the date of purchase. I had and was 4 days over the 1 year warranty. To my surprise they covered the belt and shipping. That sure did make my day !

Read this review »


1 2 3 4 ... 6 next »
51 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com