FastCap Fastbreak

  • Advertise with us
Review by Kurt T. Kneller posted 08-13-2015 12:17 AM 4567 views 1 time favorited 2 comments Add to Favorites Watch
FastCap Fastbreak No-picture-s No-picture-s Click the pictures to enlarge them

Just a quick review.
I picked up a FastCap Fastbreak sander the other day at Menards. I an currently building a router cabinet and working on the drawers which will have the plywood edges covered with veneer tape. This little thing is pretty cool. It works great for putting on a slight bevel on the veneer let alone cleaning up the edges of the bare plywood. It really makes short work of treating the edges. I highly recommend this.

-- Start with ten, end with ten.......

View Kurt T. Kneller's profile

Kurt T. Kneller

126 posts in 2222 days

2 comments so far

View Roger's profile


21030 posts in 3662 days

#1 posted 08-13-2015 12:01 PM

Thnx for your review. It’s the little things like this that helps us make decisions.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

View SteveMI's profile


1164 posts in 4153 days

#2 posted 08-16-2015 01:40 PM

I use one, it is perfect when you just want to break the corner. You do both corners at once and it gives a more even edge over the distance than with just running sandpaper along the edge.

It does not put a radius on the corner, just breaks the sharp corner.


Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics