| Review by jeffthewoodwacker | posted 03-14-2008 11:02 PM | 2969 views | 0 times favorited | 4 comments |  |
 |
- Senco Model DS202 Dura Spin Fastening system
- Brand: Senco | Category: Drill-Drivers
 |
 |
|
 |
I purchased the model DS202 14 volt Senco dura spin fastening system from Home Depot. The kit comes with a hard case, two bateries and a charger. Designed to shoot strips of screws into drywall and other materials. In two large jobs I have had several misfeeds from the gun and it gets jammed up easily. Have gone back through the instructions and fine tuned it but the results were the same. When it is working at peak performance it is a beast, but when it jams it is something else.
-- Those that say it can't be done should not interrupt those who are doing it.
4 comments so far
Dan'um Style
home | projects | blog
14182 posts in 4751 days
#1 posted 03-15-2008 12:28 AM
any idea what is causing the misfeeds and jams ?
-- keeping myself entertained ... Humor and fun lubricate the brain
jeffthewoodwacker
home | projects | blog
603 posts in 4572 days
#2 posted 03-15-2008 01:39 AM
When I disassembled the unit it looked as though the drive pin was not machined correctly. Got a replacement part and still had same issues until I started using more expensive screw strips.
-- Those that say it can't be done should not interrupt those who are doing it.
teenagewoodworker
home | projects | blog
2727 posts in 4536 days
#3 posted 03-15-2008 02:06 AM
cool. I’ve heard a lot about those drills. sometimes my dad uses the strips and just drives a screw and pulls the plastic off when he’s on the job site. I’ve always wondered about the drills that use those strips. thanks for the post.
John Gray
home | projects | blog
2370 posts in 4654 days
#4 posted 03-15-2008 02:28 PM
Very informative thanks.
-- Only the Shadow knows....................
Have your say...