Jet 14" bandsaw with 13.3 resaw capacity.

  • Advertise with us
Review by RobS888 posted 05-07-2020 05:04 PM 5433 views 2 times favorited 3 comments Add to Favorites Watch
Jet 14" bandsaw with 13.3 resaw capacity. No-picture-s No-picture-s Click the pictures to enlarge them

We ordered this saw from Rockler for $999 with free shipping from Jet. took about 2 1/2 weeks to get, but hey it was during an epidemic.

It comes in one box on a pallet and has a massive amount of styrofoam. We were able to lift the bottom up on a piece of styrofoam and add the base and feet then stand it up and walk it into position. The table(and fence) and one dust port were the only things to add. There was a small 4 inch piece of wood in the bag with the dust port… DO not throw it away or use it for a test cut! It is part of the dust collection system. It goes into a slot just below the lower blade guides. You slot it in with the saw running and it keeps the saw dust in that area to be picked up by the dust port.

We now have rack and pinion height adjustment and tool-less blade guide adjustment.

2 things that are new and pretty neat to me are the trap door and door locks. To get the higher resaw capacity the blade guides go up higher and the top of the blade guide holder (rack of rack and pinion) protrudes out the top of the body. The door locks (handles) are round and have an angled cutout that engages a pin on the doors and pulls them tight. there is foam all the way around the door as well.

The saw is pretty quite and runs very smooth so far. Nice solid machine with a large table.

-- I always knew gun nuts where afraid of something, just never thought popcorn was on the list.

View RobS888's profile


2829 posts in 3064 days

3 comments so far

View robscastle's profile


8234 posts in 3424 days

#1 posted 05-11-2020 05:11 AM

Nice unpacking review.

-- Regards Rob

View chris underwood's profile

chris underwood

17 posts in 496 days

#2 posted 05-20-2020 01:43 PM

I bought this saw a few months ago and I am very happy with it.Got the Kreg circle cutter and making circles for jigs could not be easier.Also you can get a attachment that makes cutting bowl blanks a dream.Enjoy your new toy.

-- chris underwood

View donovandak's profile


3 posts in 548 days

#3 posted 10-25-2020 05:34 AM

You say the plywood goes in with the saw running? Is that so it cuts a slot into the plywood? That’s the only thing that makes sense to me otherwise it seems I can’t avoid the blade, but thought I would check in with you since you have it running.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics