LumberJocks

All Replies on Light Walnut Finish?

  • Advertise with us
View Andy's profile

Light Walnut Finish?

by Andy
posted 08-21-2017 06:19 PM


11 replies so far

View ChefHDAN's profile

ChefHDAN

1401 posts in 3243 days


#1 posted 08-21-2017 06:26 PM

have you tried Arm R Seal?

-- I've decided 1 mistake is really 2 opportunities to learn.. learn how to fix it... and learn how to not repeat it

View rodneywt1180b's profile

rodneywt1180b

181 posts in 780 days


#2 posted 08-21-2017 06:41 PM

Have you tried just a clear finish? If that’s too light then I would look at a dilute coat of water based aniline dye stain instead. You can add more coats to darken it to the effect you want.
Rodney

-- Rodney, Centralia, WA, USA www.etsy.com/shop/ASturdyStick

View Fred Hargis's profile

Fred Hargis

5548 posts in 2887 days


#3 posted 08-21-2017 06:48 PM

I’m thinking that any oil based finish will do pretty much the same thing the Watco did. But the pic of what you want actually looks to me like you want to lighten the natural color of the walnut…and I’m not sure that’s easily possible.

-- Our village hasn't lost it's idiot, he was elected to congress.

View Andy's profile

Andy

11 posts in 672 days


#4 posted 08-21-2017 06:55 PM



have you tried Arm R Seal?

- ChefHDAN

I haven’t. I did see people recommending it before when I was looking for a matte finish for another project, but I ended up going with the Dead Flat Varnish linked in my first post. I’ll look around for some examples of Arm R Seal used on walnut.

Thanks!

View Andy's profile

Andy

11 posts in 672 days


#5 posted 08-21-2017 06:58 PM



I m thinking that any oil based finish will do pretty much the same thing the Watco did. But the pic of what you want actually looks to me like you want to lighten the natural color of the walnut…and I m not sure that s easily possible.

- Fred Hargis

My unfinished piece is actually just slightly lighter than the image in my original post. It’s almost like my unfinished walnut just has a slight haze over it that I want to darken, then seal.

I’ll look into the aniline dye that Rodney recommended.

View ClammyBallz's profile

ClammyBallz

449 posts in 1530 days


#6 posted 08-21-2017 07:03 PM

I would try a platina or blonde shellac followed by a water based poly.

View rodneywt1180b's profile

rodneywt1180b

181 posts in 780 days


#7 posted 08-21-2017 09:21 PM

I didn’t think of shellac. Good idea. It might be just enough for the effect you’re after.

-- Rodney, Centralia, WA, USA www.etsy.com/shop/ASturdyStick

View Ron Aylor's profile

Ron Aylor

2649 posts in 1041 days


#8 posted 08-21-2017 10:18 PM

Perhaps you should consider using butternut instead of walnut for the project.

View Andy's profile

Andy

11 posts in 672 days


#9 posted 08-21-2017 10:24 PM


Perhaps you should consider using butternut instead of walnut for the project.

- Ron Aylor

Thanks Ron, i’ll definitely consider that next time. Right now the desk is pretty much done though.

My plan right now, based on advice here and a bit of Googling, is to try the light shellac that Clammy recommended, followed by the water based poly that I already have on hand. Possibly with a bit of sanding after the shellac coat. Going to pick up some shellac on my way home tonight and give it a try on a tester.

I’ll try to remember to share my results here.

View DS's profile (online now)

DS

3169 posts in 2814 days


#10 posted 08-21-2017 10:48 PM

To my eye it appears to have a white wash pickling stain on the walnut.

-- "Hard work is not defined by the difficulty of the task as much as a person's desire to perform it.", DS251

View gargey's profile

gargey

1013 posts in 1169 days


#11 posted 08-21-2017 11:06 PM

Yeah its like you’re going for a sapwood look, an unusual approach.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com