All Replies on Stuctural Grade rough cut softwood near vermont (new england)

  • Advertise with us
View marcVT's profile

Stuctural Grade rough cut softwood near vermont (new england)

by marcVT
posted 08-21-2017 12:31 PM

3 replies so far

View WDHLT15's profile


1819 posts in 3080 days

#1 posted 08-22-2017 11:54 AM

In the South, commercial lumber that is graded for structural use is always kiln dried dried to 19% and planed before grading.

To get rough cut structurally graded lumber, you would have to find a sawyer like myself to saw out the boards and then hire a licensed graded to inspect and grade stamp each piece. For pine in the South, that would be a Southern Pine Inspection Bureau licensed grader. Even then, I would check with the Building Inspector beforehand so that you do not get surprised.

Funny thing is, my lumber is much better quality than the graded wood at the Box stores, but I cannot use it because it does not have that little grade stamp on it. Doesn’t matter if my lumber is superior, it is all about that little stamp.

-- Danny Located in Perry, GA. Forester. Wood-Mizer LT40HD35 Sawmill. Nyle L53 Dehumidification Kiln.

View gargey's profile


1013 posts in 1379 days

#2 posted 08-22-2017 12:18 PM

Can OP explain why he wants this?

View marcVT's profile


10 posts in 889 days

#3 posted 08-22-2017 05:40 PM

I might be being over-cautious. The rough cut boards are for a car-port.
A nice exposed wood (quasi-post-beam design)
The rafters are a fabricated beam.
I thought to play it safe I’d get structural grade lumber.
I’ll check with the county/town on code.
I found a nice local mill for hemlock.
They will probably know the process to get an inspector to stamp the boards.
I suspect my 65 cents a BF is going to go up a bunch.
Thanks for the input.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics