All Replies on Evening out color without staining

  • Advertise with us
View augdog's profile

Evening out color without staining

by augdog
posted 08-16-2017 05:03 PM

6 replies so far

View Fred Hargis's profile (online now)

Fred Hargis

6315 posts in 3298 days

#1 posted 08-16-2017 06:08 PM

Are you sure it’s been stained? Cherry turns quite dark on it’s own sometimes, and you may have sanded down and removed some of the surface darkened wood, leaving spots that haven’t aged. If true, it will darken on it’s own and at it’s own pace (which probably doesn’t match your time line).

-- Our village hasn't lost it's idiot, he was elected to congress.

View Loren's profile


10477 posts in 4453 days

#2 posted 08-16-2017 08:11 PM

You’re up a creek. At best you can try to
put some orange shellac on the sanded-through
areas and see if the appearance is more

The shellac can be stripped off easily with
denatured alcohol if it doesn’t look good.

Probably though you’re going to have to
remove all the finish and do it over.

View Ron Aylor's profile

Ron Aylor

2649 posts in 1452 days

#3 posted 08-16-2017 08:19 PM

I would just continue sanding the poly away … apply a generous amount of boiled linseed oil and sit it in the sun for a few days!

View pintodeluxe's profile


6175 posts in 3618 days

#4 posted 08-16-2017 08:29 PM

Never partially refinish is my advise. Either do the best you can on a project with matching wax, or else refinish back to bare wood. Read up on pre-stain conditioners for cherry and blotch prone wood.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View augdog's profile


3 posts in 2016 days

#5 posted 08-16-2017 09:00 PM

Yup, just as I feared. I had a sinking notion in the back of my head that this was the case, I think I just needed to hear it from you guys. Trying to cut corners and save some time now is going to take me more time. At least I quoted the guy for a full refinish.

View Gilley23's profile


489 posts in 1187 days

#6 posted 08-16-2017 09:55 PM

So you quoted him for a full refinish but you weren’t going to fully refinish it…. On something like that would you just credit him back the difference?

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics