All Replies on RAS table height

  • Advertise with us
View Bill Berklich's profile

RAS table height

by Bill Berklich
posted 08-14-2017 08:36 PM

7 replies so far

View Fred Hargis's profile

Fred Hargis

5738 posts in 2998 days

#1 posted 08-14-2017 08:42 PM

I like mine higher than most of the other stuff in the shop. The one I have now, and the 3 that came before it, were/are all at 41”. I’m fairly short, so for me this is very close to the height of my elbow. My first one was Craftsman back in the early 80’s (1970 saw) and it was at that height and I liked it…so I’ve used that for the Dewalts that followed. That said, I suspect it’s a personal preference thing to a large extant.

-- Our village hasn't lost it's idiot, he was elected to congress.

View MrUnix's profile


7478 posts in 2704 days

#2 posted 08-14-2017 08:53 PM

It really depends on what is comfortable for you – not everyone is the same. I have two that are on the factory stands… one is about 39.5” high, and the other is a smidge over 40” – and both work fine for me.


-- Brad in FL - In Dog I trust... everything else is questionable

View Mike_in_STL's profile


990 posts in 1039 days

#3 posted 08-14-2017 08:57 PM

This where personal preference is key. What feels comfortable to you my not be comfortable to someone else. Are you the only one in your shop? Are there multiple people working with you?

If you’re solo, what ever feels good to you, and makes you the most productive and safe is what I would go with.

If there will be multiple people using the tool, I’d find a height that is mutually beneficial, comfortable, and safe.

-- Sawdust makes me whole --Mike in STL

View teejk02's profile


503 posts in 1630 days

#4 posted 08-15-2017 03:03 PM

Back when I had a RAS I had work benches on both sides. I built the RAS stand so those benches served as supports. So if that sounds like a good idea, find your ideal workbench height and go from there.

View Harryn's profile


80 posts in 3093 days

#5 posted 08-15-2017 04:13 PM

Mine is 39”. I am 5’6”tall

View Bill Berklich's profile

Bill Berklich

906 posts in 894 days

#6 posted 08-15-2017 05:54 PM

Mine is 39”. I am 5 6”tall

- Harryn

Hmmm – that puts mine at 42” which is generally keeping with the taller suggestions. I’ll have to check tonight and see what it currently is.

-- Bill - Rochester MI

View unbob's profile


810 posts in 2409 days

#7 posted 08-15-2017 09:06 PM

I have my vintage Dewalt set up so I have a straight pull with my hand on the handle, I had it too high for awhile-less control.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics