LumberJocks

All Replies on Needing suggestion for cabinet scraper

  • Advertise with us
View Dustin's profile

Needing suggestion for cabinet scraper

by Dustin
posted 08-07-2017 03:20 PM


18 replies so far

View jonah's profile

jonah

2092 posts in 3904 days


#1 posted 08-07-2017 03:27 PM

I love my #80. I got two of them from eBay for something like $25 shipped. I had to de-rust and flatten/burnish the blade, sure, but they are great. Card scrapers, as you note, hurt the hell out of your hands.

View CharlesA's profile

CharlesA

3393 posts in 2403 days


#2 posted 08-07-2017 03:40 PM

Dustin, I have a Stanley #80 that I’ve never been able to use correctly. You’re welcome to borrow it and, in return, show me how to use it effectively when you’re done with it.

-- "Man is the only animal which devours his own, for I can apply no milder term to the general prey of the rich on the poor." ~Thomas Jefferson

View Bill Berklich's profile

Bill Berklich

999 posts in 994 days


#3 posted 08-07-2017 04:01 PM

Currently on eBay $15-$35 incl shipping for a “vintage” Stanley No 80. A fully functional No 12 is $10 $40 plus shipping. (I was just trolling for a No 12)

-- Bill - Rochester MI

View Rich's profile

Rich

5137 posts in 1195 days


#4 posted 08-07-2017 04:07 PM

I got the Kunz when it went into one of those Amazon price drops. Out of the box, it deserves the questionable reviews. The blade just a blunt 90º edge, and the sole is ground to about 60 grit. However, the rest of the finish is very nice, and after doing a proper setup on the blade and flattening the sole, it’s a champ, so I’m very happy with the purchase.

One thing I did do was to replace those awkward screws with wing-bolts, M5 and M6 if I recall correctly. They make set-up and tweaking the aggressiveness of the cut a breeze.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View Loren's profile

Loren

10477 posts in 4253 days


#5 posted 08-07-2017 04:15 PM

The Stanley no. 80 is a real basic tool. I don’t
use it for fine scraping but for taking off
ridges in glue-ups and stuff like that it’s
great. The edge should be beveled to 45
degrees, so it doesn’t have two edges
like a card scraper. I got mine off ebay
and it had no blade in it so I cut the end
off a card scraper to make it shorter.

View Rich's profile

Rich

5137 posts in 1195 days


#6 posted 08-07-2017 04:38 PM

The customer image on the Amazon page for the Kunz shows how to prepare the blade. The reviewer also references paulsellers.com as his source for information (maybe the image came from there, I didn’t look).

Edit: If you go to Paul’s site and search for “Kunz #80” he has several blog posts on it. Naturally, any setup tips will apply to any #80 scraper.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View Dustin's profile

Dustin

705 posts in 1346 days


#7 posted 08-07-2017 04:45 PM

Thanks for the input, folks!

Loren, removing squeeze-out and leveling off glue-up’s is the main driver behind this, so glad to hear that it should work well for that.

Rich, with all the work the Kunz needs, it sounds like I’d be just as happy to go used and save a few bucks when the time comes. Also, I did see that review, and read the whole Paul Sellers entry on cabinet scrapers earlier today. Very informative.

Charles, I’d love to take you up on your offer. Be a good chance to test drive one before picking one up, and double bonus if I can return it to you with more utility than before.

-- "Ladies, if your husband says he'll get to it, he'll get to it. No need to remind him about it every 6 months."

View CharlesA's profile

CharlesA

3393 posts in 2403 days


#8 posted 08-07-2017 04:48 PM

Dustin, let’s set up a time for you to get it. I can bring it downdown if that’s easiest.

-- "Man is the only animal which devours his own, for I can apply no milder term to the general prey of the rich on the poor." ~Thomas Jefferson

View Robert's profile

Robert

3600 posts in 2086 days


#9 posted 08-07-2017 05:52 PM


Currently on eBay $15-$35 incl shipping for a “vintage” Stanley No 80. A fully functional No 12 is $10 $40 plus shipping. (I was just trolling for a No 12)

- Bluenote38

I’ve been looking, too.

Beware almost all under $25 do not include a blade. And be careful to check shipping. It can add $8-10 to the bid. You also have to be careful I bought a No 81 and the “blade” turned out to be a piece of thick sheet metal.

For a complete No. 80 plan on more like $35-40.

You can try bidding all I can say is “Good Luck”. I’ve about given up on anything Stanley on Ebay. Everybody thinks collectors are bidding, not users.

BTW did you see the one with the block plane iron?

LV sells replacement blades for about $14

-- Everything is a prototype thats why its one of a kind!!

View AlaskaGuy's profile

AlaskaGuy

5522 posts in 2915 days


#10 posted 08-07-2017 06:04 PM

How about a scraper plane?

http://www.woodmagazine.com/woodworking-tips/techniques/skills/using-scraping-plane

-- Alaskan's for Global warming!

View CharlesA's profile

CharlesA

3393 posts in 2403 days


#11 posted 08-07-2017 06:08 PM

BTW, here’s my favorite scraper I earned about it here on LumberJocks.

-- "Man is the only animal which devours his own, for I can apply no milder term to the general prey of the rich on the poor." ~Thomas Jefferson

View Ocelot's profile

Ocelot

2375 posts in 3244 days


#12 posted 08-07-2017 10:42 PM

I have an old Stanly No 80, I got as part of a box-o-planes purchase so less than $25. I haven’t used it. Chris Shwartz says the No 80 is the only thing you need. Don't bother with No 81, No `12 etc.

View Loren's profile

Loren

10477 posts in 4253 days


#13 posted 08-07-2017 10:49 PM

Lee Valley sells this:
http://leevalley.com/us/wood/page.aspx?cat=1,310&p=32635

If you have an extra #4 or #5 plane around
it might be a good solution. I’ve never
tried it.

View Ocelot's profile

Ocelot

2375 posts in 3244 days


#14 posted 08-07-2017 10:55 PM

I bought one of those Veritas scraper inserts and have not had any luck using it. But I don’t have any other scraper experience and didn’t have a proper burnisher at the time.

View Dustin's profile

Dustin

705 posts in 1346 days


#15 posted 08-08-2017 12:09 PM

Thanks for everything, folks. I’m taking Charles up on his offer to borrow his no. 80, and am pretty stoked to start playing around with it. Between Chris Shwarz and Paul Sellers, the excitement is definitely starting to build. If I enjoy using this one well enough, I’ll likely end up putting down the $70 for the Lee Valley.

-- "Ladies, if your husband says he'll get to it, he'll get to it. No need to remind him about it every 6 months."

View OSU55's profile

OSU55

2503 posts in 2595 days


#16 posted 08-08-2017 12:25 PM

I’ve used the LV a couple of times at shows, and did not like it as well as my #80 Stanley. The handle position is different. Primarily when pushing, which is how I like to use the tool. The #80 is very capable of creating a fine surface when properly tuned and the blade set properly. I have an LV scraper plane that is a super finishing tool. The #80 now gets used for glue scraping.

View Don W's profile

Don W

19425 posts in 3173 days


#17 posted 08-11-2017 09:07 PM

I’ve got an #80 for sale if that’s what you decide on

http://www.timetestedtools.net/items-for-sale/

I’ve also got a blog on making a blade from a saw plate should you find something without a blade.

Each type has some advantages, and the #80 isn’t bad, especially for small areas. If I am doing something like a bench or table top I really like a #112 type

-- http://timetestedtools.net - Collecting is an investment in the past, and the future.

View Andre's profile

Andre

3004 posts in 2411 days


#18 posted 08-12-2017 03:21 AM

I have the Stanley #80 and the Veritas, changed the Stanley blade out with a Hock, big difference.
Both work extremely well when sharpened properly. Maybe some day Veritas will offer a PMV-11 blade!

-- Lifting one end of the plank.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com