LumberJocks

All Replies on Stanley #6 Plane Type 13 - Lever Cap Spring

  • Advertise with us
View brcolow's profile

Stanley #6 Plane Type 13 - Lever Cap Spring

by brcolow
posted 08-07-2017 12:24 AM


8 replies so far

View Don W's profile

Don W

19387 posts in 3133 days


#1 posted 08-07-2017 12:32 AM

I’ve never tried, but can’t see a good reason why all of the above wouldn’t be possible.

But the flip side of that would be do it bother you enough to try?

-- http://timetestedtools.net - Collecting is an investment in the past, and the future.

View brcolow's profile

brcolow

3 posts in 858 days


#2 posted 08-07-2017 01:35 AM

Thanks for the reply, Don. I tried to punch the pin out on the front side but it didn’t budge. My setup for that was less than ideal though…I was thinking something like an “anvil” with a bunch of holes of different diameters would be ideal.

Here is a photo of the pin from the front:

Here is a photo of the pin from the back:

View TheFridge's profile

TheFridge

10859 posts in 2051 days


#3 posted 08-07-2017 03:11 AM

The spring doesn’t really factor in once the lever cap is tightened. So I wouldn’t worry about it personally.

You could drill the back of the river out and ouch it through the front maybe if you really wanted. I would think that rivet is really in there though.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View brcolow's profile

brcolow

3 posts in 858 days


#4 posted 08-07-2017 05:54 AM

Yes, it seems like the pin is not meant to ever come out. Is it possible to re-temper the spring with it still attached?

As long as function is not impeded I don’t really care, for some reason I thought it would affect the function.

View Smitty_Cabinetshop's profile

Smitty_Cabinetshop

16261 posts in 3184 days


#5 posted 08-07-2017 11:09 AM

I cannot imagine how function (use) is impacted by that spring.

-- Don't anthropomorphize your handplanes. They hate it when you do that. -- OldTools Archive --

View Don W's profile

Don W

19387 posts in 3133 days


#6 posted 08-07-2017 11:29 AM

The spring serves a couple of functions. It holds the lever open when off the plane, reduces wear on the cap iron, and prevents the lever from lifting the lever cap when it’s engaged.

If it’s lost it’s temper, it will only affect the first function, which in my opinion is irrelevant in use.

-- http://timetestedtools.net - Collecting is an investment in the past, and the future.

View Tim's profile

Tim

3859 posts in 2527 days


#7 posted 08-07-2017 12:36 PM

It does look like that needs to get punched through from the front. If you have a block of scrap steel you could make your own anvil, but if you don’t, a block of hardwood could be made to work, it will just rob a little bit of the force. Drill a hole the wide part of that rivet would fit through, and if you want to, shape the space around the hole to fit the underside of the lever cap. Then with the right size punch you should be in business. I suppose a wood “anvil” might have enough give to increase the odds of breaking the lever cap before the pin comes out.

View bandit571's profile

bandit571

24124 posts in 3249 days


#8 posted 08-07-2017 01:11 PM

One could always pick up another lever cap.

-- A Planer? I'M the planer, this is what I use

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com