All Replies on Help designing a queen bed

  • Advertise with us
View Chucknbob's profile

Help designing a queen bed

by Chucknbob
posted 08-07-2017 12:24 AM

2 replies so far

View TungOil's profile


1383 posts in 1377 days

#1 posted 08-07-2017 01:41 AM

I think it depends on your bed design, but probably not. You will need something more substantial for the legs and side rails, but you could use 4/4 for the headboard and footboard panels. Why not just buy some 6/4 or 8/4 for the parts that need to be heavier? It’s not much more expensive than 4/4 on a bd ft price basis. Gluing up 4/4 boards to obtain thicker stock is a viable option as well (for the legs, for example).

Another option to keep cost down is to utilize a standard metal frame and build a headboard that bolts to the frame. Then the headboard is essentially decorative so it can be less substantial.

-- The optimist says "the glass is half full". The pessimist says "the glass is half empty". The engineer says "the glass is twice as big as it needs to be"

View unclearthur's profile


374 posts in 2670 days

#2 posted 08-07-2017 04:54 AM

Mattius Wandel has some free plans for beds he made out of construction lumber. I think they look OK; I’m making the queen sized one now, in fact. Sometimes its nice to make things out of cheap wood; less stress over mistakes and when its made from thick pieces and finished with poly its plenty durable. Nowhere near as nice as a hardwood bed of course, but satisfying in a different way.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics