LumberJocks

All Replies on Finished walnut not shiny enough for client

  • Advertise with us
View shoichi's profile

Finished walnut not shiny enough for client

by shoichi
posted 08-04-2017 08:40 AM


4 replies so far

View Gilley23's profile

Gilley23

489 posts in 777 days


#1 posted 08-04-2017 10:27 AM

So is the table not shiny enough or are you trying to maintain the finish?

View Bill White's profile

Bill White

5206 posts in 4355 days


#2 posted 08-04-2017 11:08 AM

An automotive rubbing compound will polish the table. Maguire’s makes some good stuff. Rub out and wax (not auto wax).
Bill

-- [email protected]

View OSU55's profile

OSU55

2316 posts in 2384 days


#3 posted 08-04-2017 11:14 AM

With the concoction used I doubt there is much of a film thickness to be rubbed out. Putting some coats of just poly will add sheen and build film thickness which can then be rubbed for desired sheen.

View Gene Howe's profile

Gene Howe

11591 posts in 3823 days


#4 posted 08-04-2017 11:50 AM

OSU55 is right on. I use a similar concoction but just a 50/50 mix of oil and poly for the first coat. Then reduce the oil by 50% for each succeeding coat. Usually, for items that will see lots of use, a couple final coats of straight poly. With light sanding between coats. To finish it off, a rub down with Johnson and Johnson paste wax applied with pads of Liberon wool.

-- Gene 'The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.' G. K. Chesterton

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com