All Replies on Jet 14" Bandsaw fence not square to table, ideas on aligning?

  • Advertise with us
View PatrickIrish's profile

Jet 14" Bandsaw fence not square to table, ideas on aligning?

by PatrickIrish
posted 08-04-2017 06:48 AM

3 replies so far

View MrUnix's profile (online now)


7533 posts in 2763 days

#1 posted 08-04-2017 07:11 AM

Ummm… the fence attaches to the table, right? So loosening the trunnions and moving the table won’t accomplish much. There should be a way to align the fence itself, however I don’t have one as a reference, so I can’t help you with that. But IMO, it’s not all that important. Heck, I have a POS homemade fence I scavenged off an old Ohio Forge benchtop table saw, and made rails from left-over table mounting angle iron from a RAS upgrade.

My fence is certainly not parallel to anything, but it still cuts just fine and re-sawing still comes out great. The unimportance of being dead-nuts parallel to the blade/miter slot is even shown in the obligatory band saw tune up video – where he deliberately kicks the fence out of whack and still is able to re-saw a nice thin slice:

Band Saw Clinic with Alex Snodgrass
(Fence stuff is about 15 minutes into the video if you want to skip ahead)


-- Brad in FL - In Dog I trust... everything else is questionable

View Sparks500's profile


255 posts in 894 days

#2 posted 08-04-2017 12:19 PM

Bandsaws never cut square with the table. you have to set the fence for blade drift.

-- A good day is any day that you're alive....

View jdh122's profile


1104 posts in 3381 days

#3 posted 08-04-2017 12:31 PM

A lot of people argue that with new blade-making techniques there hsould be no need to adjust for drift with a properly set-up bandsaw (mandatory reference here to Snodgrass video:
Whatever the case, it certainly isn’t as important to have fence line up with the blade as it is with a tablesaw. If, as you say, the saw cuts great I,d probably leave it alone. But if you want to adjust it you can probably shim the fence rails out on one side or the other.

-- Jeremy, in the Acadian forests

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics