All Replies on Favorite power tool brands?

  • Advertise with us
View Andrew714's profile

Favorite power tool brands?

by Andrew714
posted 07-26-2017 09:35 PM

16 replies so far

View Holbs's profile


2349 posts in 2829 days

#1 posted 07-27-2017 12:47 AM

If bosch made a 14” or 20” bandsaw or full sized cabinet saw, I’d buy it. I love bosch. From their spark plugs to their wood working relevance (jig saw, bosch 4100, 12v drills, etc).

-- The Carpenter Bee is derived from the Ancient Greek word wood-cutter "xylokopos/ξυλοκὀπος"

View TungOil's profile


1382 posts in 1294 days

#2 posted 07-27-2017 01:20 AM

Personally I’m partial to Powermatic but there are good and bad tools in every line so do your research. For table saws and jointers, consider looking for a decent used Delta or PM. The US made tools remain some of the best ever made in the smaller tools and are really only exceeded by the newer European equipment that is targeted at commercial shops. The newer equipment will have better safety features, but you can often retrofit older machines.

-- The optimist says "the glass is half full". The pessimist says "the glass is half empty". The engineer says "the glass is twice as big as it needs to be"

View sawdustdad's profile


379 posts in 1684 days

#3 posted 07-27-2017 01:38 AM

I have a Grizzly dust collector and one of their 20 inch planers. While serviceable, I don’t consider them in the same fit and finish class as Delta, Jet or Powermatic,.

Parts availability would be a big factor, and a large population of similar tools in operation means parts will likely be available forever. So most of my stuff is Delta or Rockwell/Delta.

-- Murphy's Carpentry Corollary #3: Half of all boards cut to a specific length will be too short.

View knotscott's profile


8382 posts in 4175 days

#4 posted 07-27-2017 02:05 AM

Grizzly is a direct importer, meaning there is no dealer markup. That, and their shorter warranty make up the bulk of their price difference. They sell lots and lots of tools, and not all are of the same quality…their higher tools tend to have a really good reputation. I’ve had a 6”jointer and 2 hp DC since 2001 with zero issues. I’ve had a Shop Fox W1677 (G1023SL equivalent) since 2008, also without issue. It’s not on par with Powermatics best stuff, but it’s very functional, and you get a lot for the money IME.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View bondogaposis's profile


5802 posts in 3150 days

#5 posted 07-27-2017 01:07 PM


-- Bondo Gaposis

View GR8HUNTER's profile


7643 posts in 1512 days

#6 posted 07-27-2017 01:20 PM


- bondogaposis

LMAO :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View PPK's profile


1767 posts in 1609 days

#7 posted 07-27-2017 01:27 PM

I have Grizzly Table saw and Bandsaw. I really like both of them. They are quite good quality for what you pay. I have not had issues with either of them. Obviously they aren’t the same caliber as Powermatic, but you also obviously don’t pay Powermatic prices.

-- Pete

View Bill White's profile

Bill White

5293 posts in 4760 days

#8 posted 07-27-2017 02:49 PM

Grizz here with the TS, BS, and wood lathe. No complaints a all. Great tech support.
I wouldn’t touch any new Delta stuff.

-- [email protected]

View PPK's profile


1767 posts in 1609 days

#9 posted 07-27-2017 04:04 PM

I agree 100% with Bill White: Don’t touch the new Delta stuff. Delta is no longer any good.

-- Pete

View Robert's profile


3781 posts in 2280 days

#10 posted 07-27-2017 04:33 PM

In my shop I have mainly Jet and Grizzly. My Jet Xacta TS is a extremely solid machine.

So is the Grizzly 20” planer and Grizzly jointer.

I have a Rikon 19” bandsaw which I think the motor is going bad. Its about 8 years old.

The only PM machine I have is a floor mortiser – its a dream.

I recently bought a Ryobi impact and angle drill.

Have to say, so far I am impressed (other than the trigger location on the angle drill is all wrong).

My Bosch 12V impact driver lasted less than 2 years with very light use.

-- Everything is a prototype thats why its one of a kind!!

View Bill_Steele's profile


714 posts in 2531 days

#11 posted 07-27-2017 04:33 PM

I own power tools by Jet, Delta, Porter Cable, Triton, Festool, Bosch, DeWalt, SuperMax, and Laguna. I’m happy with all of them. My 20 year old Jet contractors saw is still going strong and has given me very good results over the years. I think for the money Jet is a decent brand. When this saw finally dies I’m going to consider SawStop or Powermatic.

I think Festool makes very high quality tools, but they are extremely expensive. If money is not a highly weighted factor I would look at that brand.

I tend to rely on tool reviews quite a bit. If I’m shopping for a specific tool, I look for tool reviews in wood working magazines (e.g. Fine Woodworking) or online. I also check out or woodworking shopping sites and read through the reviews. It’s important to keep in mind that not every good or bad review should be considered a valid source of information. Sometimes the person that posts it is a moron.

View Andrew714's profile


62 posts in 2075 days

#12 posted 07-31-2017 04:38 PM

Thanks for all the input guys. It sounds like my opinion of Grizzly is accurate: not the best available, but a good low budget option.

View Ron Aylor's profile

Ron Aylor

2649 posts in 1447 days

#13 posted 07-31-2017 04:58 PM

I personally like …

View Woodknack's profile


13428 posts in 3179 days

#14 posted 07-31-2017 09:43 PM

Just remember they are cheap in part because you do the quality control. Grizzly does not design or build their machines.

-- Rick M,

View oldnovice's profile


7591 posts in 4167 days

#15 posted 07-31-2017 10:57 PM

My favorite power tool is inexpensive, works well, and lasts a long time … that eliminates a lot of contenders!

-- "It's fine in practise but it will never work in theory"

View becikeja's profile


1121 posts in 3612 days

#16 posted 07-31-2017 11:18 PM

Powermatic is my first choice. But can’t always justify the price.
I have had hit or miss with Bosch and Grizzly.
I do like Dewalt for hand power tools.

-- Don't outsmart your common sense

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics