LumberJocks

All Replies on what tool to buy next?

  • Advertise with us
View woodyhawk's profile

what tool to buy next?

by woodyhawk
posted 07-25-2017 02:23 PM


12 replies so far

View Dwain's profile

Dwain

592 posts in 4252 days


#1 posted 07-25-2017 02:28 PM

Depends upon the kind of work you do. It’s really that simple. You didn’t mention whether or not you have a workbench. That would be something to consider. For $200, you would have to get a used planer or jointer. Again, figure out the type of work you want to do, then see what you need.

-- When you earnestly believe you can compensate for a lack of skill by doubling your efforts, there is no end to what you CAN'T do

View GR8HUNTER's profile

GR8HUNTER

6103 posts in 1106 days


#2 posted 07-25-2017 02:48 PM

as Dwain stated start doing projects and see what interest you ….maybe a scroll saw ….some shops I been in only have this 1 tool and turn out great works of art …..GOOD LUCK :<)) Welcome 2 LJ’s

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View Rich's profile

Rich

4489 posts in 982 days


#3 posted 07-25-2017 02:50 PM

Along the lines of what Dwain said above, I’d suggest deciding on what you want your next project to be and buy whatever you’re missing to make it.

Buying what you think you need to complete your shop is a good way to wind up with lots of things you never use. Instead, buy it on an as-needed basis.

-- Knowledge is not skill. Knowledge plus ten thousand times is skill. -- Shinichi Suzuki

View Robert's profile

Robert

3403 posts in 1874 days


#4 posted 07-25-2017 03:21 PM

Hold on to your money and buy the tool the will help you on your next project.

Never buy a tool because you “think” it would be good to have (BTDTGTS).

The only exception to that is if you don’t already own a #4 hand plane, buy one!

-- Everything is a prototype thats why its one of a kind!!

View knotscott's profile

knotscott

8290 posts in 3769 days


#5 posted 07-25-2017 03:27 PM

If you use a lot of dimensional lumber, a planer would be a nice addition IMO.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View bondogaposis's profile

bondogaposis

5414 posts in 2744 days


#6 posted 07-25-2017 03:32 PM

If you don’t know, you don’t need it. Pick a project and if you are lacking a tool for that then buy it. Never buy tools just to buy tools, buy them as the need arises.

-- Bondo Gaposis

View Loren's profile

Loren

10477 posts in 4041 days


#7 posted 07-25-2017 03:51 PM

If you’re going to build casework and
furniture type things a planer is a real
time saver. There aren’t many other
ways to thickness and flatten boards.

The other major way to do it is with a
sturdy workbench and hand planes.
Flattening one side of a board with a
hand plane is not a big deal but thicknessing
entire boards with one can be a lot
of work.

View AlaskaGuy's profile

AlaskaGuy

5283 posts in 2702 days


#8 posted 07-25-2017 07:37 PM



If you don t know, you don t need it. Pick a project and if you are lacking a tool for that then buy it. Never buy tools just to buy tools, buy them as the need arises.

- bondogaposis

IMHO this is the best answer to your question.

-- Alaskan's for Global warming!

View Woodknack's profile

Woodknack

12810 posts in 2773 days


#9 posted 07-25-2017 07:40 PM

A planer. Save and spend a little more if you can.

-- Rick M, http://thewoodknack.blogspot.com/

View woodyhawk's profile

woodyhawk

4 posts in 699 days


#10 posted 07-25-2017 11:38 PM

Thanks to everyone who replied! This is a great site! Some very sound advice. Guess I need to try to avoid my tool junkie urge to buy a new tool every time I can, and make sure I really need it. Makes a lot of sense, especially in my tiny shop. Thanks again everyone.

-- Brett ~ West Des Moines, IA

View mangorockfish's profile

mangorockfish

18 posts in 744 days


#11 posted 07-27-2017 01:26 PM

Clamps!!! I’m building outside shutters for the wife and bought the one thing I need for the project, clamps. That is a great rule of thumb to remember: Buy things on an as needed basis.

View Jon Hobbs's profile

Jon Hobbs

147 posts in 1098 days


#12 posted 07-27-2017 03:32 PM

Since you confessed to being fairly new to woodworking, if you have to spend the money, use it to improve your skills. Sign up for a class, buy some DVD’s, join the local guild, or buy materials to practice on. It may not be as fun as wheeling a shiny new tool into your shop, but your future projects will be the better for it.

-- Jon -- Just a Minnesota kid hanging out in Kansas

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com