All Replies on Using a speed control on a grinder?

  • Advertise with us
View Bill White's profile

Using a speed control on a grinder?

by Bill White
posted 07-20-2017 02:46 PM

6 replies so far

View Carloz's profile


1147 posts in 1475 days

#1 posted 07-20-2017 03:12 PM

It will harm the motor big time but will not lower the speed.

View William Shelley's profile

William Shelley

609 posts in 2353 days

#2 posted 07-20-2017 03:16 PM

Find a 3-phase bench grinder and use a small VFD to control it’s speed.

-- Woodworking from an engineer's perspective

View Bill White's profile

Bill White

5310 posts in 4844 days

#3 posted 07-20-2017 03:33 PM

Why will it harm the motor? They work on induction motor ceiling fans. Just wantin’ to know.

-- [email protected]

View TheFridge's profile


10861 posts in 2370 days

#4 posted 07-20-2017 04:11 PM

Ceiling fans have more windings to accommodate speed. Typical induction motors are not capable of multi speed unless listed for that purpose (ex: some furnace fans)

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View JCamp's profile


1229 posts in 1434 days

#5 posted 07-20-2017 04:19 PM

Are you replacing a on/off switch with a variable speed switch or replacing a broken variable speed switch with a cheaper non name brand variable speed switch?
If it is the last one then no it wont hurt it. If its the first then yes it will work but id be afraid to try it on a good grinder just because it wasn’t made for it.

-- Whatsoever thy hand findeth to do, do it with all thy might

View MrRon's profile


5942 posts in 4127 days

#6 posted 07-20-2017 04:30 PM

You can’t control the speed of a single phase induction motor. Any speed control has to be built into the motor; no external device. A universal motor (brushes) can be controlled by a variable speed device.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics