LumberJocks

All Replies on Solid Wood Edgebanding

  • Advertise with us
View JustLikeJames's profile

Solid Wood Edgebanding

by JustLikeJames
posted 07-15-2017 03:08 PM


8 replies so far

View Loren's profile

Loren

10477 posts in 3944 days


#1 posted 07-15-2017 03:33 PM

I cut 1x stock into strips. It’s easier.

View JustLikeJames's profile

JustLikeJames

173 posts in 1859 days


#2 posted 07-15-2017 03:55 PM

Do you buy it slightly thicker than 3/4” and flush trim it after gluing on?


I cut 1x stock into strips. It s easier.

- Loren


View Loren's profile

Loren

10477 posts in 3944 days


#3 posted 07-15-2017 03:59 PM

Yes. Planed hardwood often comes milled
to 13/16” anyway. I buy rough or skip-planed
lumber and it comes thicker still.

View MrRon's profile

MrRon

5364 posts in 3540 days


#4 posted 07-15-2017 05:45 PM

Cutting a strip from 1/4” thick stock would give you a uniformly smooth surface to glue to. Cutting strips from 3/4” thick stock will leave you with a rough surface on both sides that would require sanding unless you have a blade that will guarantee a smooth cut. The latter is easier, but the results will be more sanding. I’ve done it both ways, but never really given it much thought.

This brings up another question; what do you do at rounded corners?

View JustLikeJames's profile

JustLikeJames

173 posts in 1859 days


#5 posted 07-15-2017 06:02 PM

Thanks. Buying it rough sawn is a good idea. Saves me some money and I’m gonna trim it flush and sand it anyways.


Yes. Planed hardwood often comes milled
to 13/16” anyway. I buy rough or skip-planed
lumber and it comes thicker still.

- Loren


View Loren's profile

Loren

10477 posts in 3944 days


#6 posted 07-15-2017 06:07 PM

I run it through the planer on both
faces before gluing. I’ve also tried
thickness sanding it before gluing
but I don’t think it saves any time
versus orbital sanding after it’s glued
on.

View JustLikeJames's profile

JustLikeJames

173 posts in 1859 days


#7 posted 07-15-2017 06:12 PM

Sounds like either way is fine and it’s just personal preference. I think unless someone can give me a good reason not to, I’ll get rough sawn 1x stock and cut it in 1/4” strips. With the saw blades we got these days, cutting glueable edges isn’t too big of a deal. I have Freud glue line rip and premier fusion blades that leave an almost flawless finish as long as I feed at the right pace to avoid burn marks. Thanks


Cutting a strip from 1/4” thick stock would give you a uniformly smooth surface to glue to. Cutting strips from 3/4” thick stock will leave you with a rough surface on both sides that would require sanding unless you have a blade that will guarantee a smooth cut. The latter is easier, but the results will be more sanding. I ve done it both ways, but never really given it much thought.

This brings up another question; what do you do at rounded corners?

- MrRon


View JackDuren's profile

JackDuren

388 posts in 1256 days


#8 posted 07-15-2017 10:00 PM



Yes. Planed hardwood often comes milled
to 13/16” anyway. I buy rough or skip-planed
lumber and it comes thicker still.

- Loren

13/16 is a requested size from the supplier. Your home depot,etc will sell in 3/4

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com