LumberJocks

All Replies on Box Construction

  • Advertise with us
View IHRedRules's profile

Box Construction

by IHRedRules
posted 07-15-2017 02:33 AM


4 replies so far

View Loren's profile

Loren

10477 posts in 4210 days


#1 posted 07-15-2017 02:36 AM

I think you’ll be alright gluing it. I’ve
seen a fair number of tissue boxes that
seemed to be solid wood without cracked
tops.

View Rich's profile

Rich

5001 posts in 1151 days


#2 posted 07-15-2017 02:56 AM

I glue mine. Given that the grain on the top runs the long way, a 5” or so cross grain hasn’t shown any signs of problems due to movement. I think it’s just too short of a distance to matter, particularly since it’s indoors where the humidity doesn’t vary as much.

View brtech's profile

brtech

1066 posts in 3485 days


#3 posted 07-15-2017 02:32 PM

I’m sure glueing will work. I’ve built similar boxes with box joints, which you might or might not think is attractive for this application. The boxes are super strong tho. I’ve done one with 1/8” BB ply that was about 11×5 x 3 and was surprisingly strong and light. I got some ply laser cut for that application and the laser burnt edge made the whole project come out very slick. Not a tissue box tho.

View Jim Finn's profile

Jim Finn

2763 posts in 3484 days


#4 posted 07-15-2017 08:28 PM

I have been making tissue box covers and since June first,I make and sell an average of five of these a week. I make the ones to accept the cube shaped tissue boxes. I make them of 3/8” cedar and just glue the top on with white glue.The mitered corners on the sides are glued with the same, white glue.

-- No PHD just a DD214

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com