All Replies on VERY old wooden bowl has a massive crack??!!

  • Advertise with us
View YIAYIA's profile

VERY old wooden bowl has a massive crack??!!

posted 07-09-2017 08:31 PM

3 replies so far

View Planeman40's profile


1519 posts in 3640 days

#1 posted 07-10-2017 02:28 PM

Not much you can do now. What has happened is the wood has lost moisture over time and has shrunk creating the crack. Your mother was right about soaking the wood. You can try soaking the wood for a good while to see if it will close the crack up. If it does close the crack completely, glue the crack using the very thin type of cyanoacrylic glue (Super Glue). Wipe the bowl dry of water after soaking and let it sit for a few hours to dry. Then apply the glue to the crack. Capillary action will draw the glue deep into the crack and the moisture in the wood will act as a catalyst to set the glue. Let it sit over night to make sure the glue has completely hardened, then lightly sand the glued area with fine sandpaper to blend the crack and glue. Truthfully, there is about a 50/50 chance this will work successfully, but what have you got to lose? If it does work, take care of the bowl by soaking it occasionally (the glue is waterproof) and rubbing it occasionally with a food-safe oil like a cooking oil.

-- Always remember: It is a mathematical certainty that half the people in this country are below average in intelligence!

View dhazelton's profile


2839 posts in 3176 days

#2 posted 07-10-2017 03:26 PM

One inch long crack or one inch wide crack? I would do what you can to get moisture back into the wood and think about maybe doing a make-do repair. It is an antique at this point and the repair is just another point along the bowls journey to the next caretaker.

View RangerJay's profile


7 posts in 1201 days

#3 posted 07-10-2017 04:28 PM

1” is a lotta crack!!

I’ve never done anything this size before. But having said that my own instinct suggests to me that moisture should be re-introduced slowly over a period of time – it took a long time for a crack that size to develop and maybe it should take a while to bring it back to normal.

Although it might not happen – the risk I see in re-introducing moisture quickly is that it there is no real chance for the piece to absorb moisture evenly – possibly encouraging warping of a different kind.

What about a rubbermaid tote? – place the bowl in the tote with a bowl of water and allow the humidity in the air within the tote to do its work over time. Think I’d check on it on a fairly regular basis (daily) and see how it is doing – look for how it is coming together – and if it looks like the edges are not going to line up then devise some type of clamping mechanism (early in the game) to encourage the edges to stay lined up as the wood swells.

Once (if) the crack closes then apply glue as above and re-finish.

Good Luck!


Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics