LumberJocks

All Replies on Table saw blade height adjustment

  • Advertise with us
View AlaskaGuy's profile

Table saw blade height adjustment

by AlaskaGuy
posted 07-09-2017 04:13 AM


10 replies so far

View Woodknack's profile

Woodknack

12812 posts in 2774 days


#1 posted 07-09-2017 04:50 AM

Haha. I like the guy working directly behind the guy ripping. My shop teacher would have a heart attack at the whole scene.

-- Rick M, http://thewoodknack.blogspot.com/

View mrg's profile

mrg

860 posts in 3393 days


#2 posted 07-09-2017 01:21 PM

Safety, we don’t need safety.

-- mrg

View Bill White's profile

Bill White

5206 posts in 4354 days


#3 posted 07-09-2017 02:22 PM

Scared me, and I’m half a world away.
Bill

-- [email protected]

View 000's profile

000

2859 posts in 1293 days


#4 posted 07-09-2017 02:24 PM

One thing I’ve noticed in these videos.
They mostly work barefoot,
They mostly don’t sweep to often or stack wood, looks like most wood is just thrown in a pile.

But what impresses me the most, is the equipment these shops use. Most is very heavy duty industrial.

View Holbs's profile

Holbs

2213 posts in 2423 days


#5 posted 07-09-2017 06:05 PM

Interesting blade height adjustment for sure. Looks to be all cast iron top. What engineer decided to move many lbs of cast iron up and down across a static blade? You can also see the entire table top & supporting arch deflect 1/2” or so forward and backward so not every handy for accuracy stuff.

-- The Carpenter Bee is derived from the Ancient Greek word wood-cutter "xylokopos/ξυλοκὀπος"

View jonah's profile

jonah

2075 posts in 3692 days


#6 posted 07-09-2017 06:22 PM

It looks like some kind of combination machine. The jointer part was running off the same motor as the table saw. I think the moving table is because you can’t move the arbor with the motor connected to the other parts of the machine. At least not easily.

View bondogaposis's profile

bondogaposis

5414 posts in 2745 days


#7 posted 07-09-2017 06:31 PM

The miter saw on the floor, what an awkward way to work.

-- Bondo Gaposis

View Woodknack's profile

Woodknack

12812 posts in 2774 days


#8 posted 07-09-2017 07:29 PM

This would be the US without OSHA.

-- Rick M, http://thewoodknack.blogspot.com/

View Carloz's profile

Carloz

1147 posts in 985 days


#9 posted 07-09-2017 07:36 PM

It would not be possible with a tilting table saw most of us have.
I like their dust collector – a large fan blowing dust into the other guy face. However the thing that strikes the most is the angle grinder with no blade cover, just under the operator’s feet. I hope it is not on.

View Loren's profile

Loren

10477 posts in 4042 days


#10 posted 07-09-2017 08:01 PM

Old tilt-top saws often adjust like that.

That’s a Japanese combo machine. It uses
a single shaft to drive the jointer, planer
and saw blade. Generally the top doesn’t
tilt.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com