All Replies on Anyone have a 20" or larger bandsaw I could use in the Tampa / St. Pete Florida area

  • Advertise with us
View zzzzdoc's profile

Anyone have a 20" or larger bandsaw I could use in the Tampa / St. Pete Florida area

by zzzzdoc
posted 07-08-2017 11:32 PM

2 replies so far

View Quikenuff's profile


66 posts in 1746 days

#1 posted 07-10-2017 01:22 AM

My 17” saw only has 12” of resaw, a 21” bandsaw only has about 14” and 24” saw only about 16” of resaw. You would need a much, much larger saw for 20” of resaw. (correction: there are some larger Laguna saws starting at 20” that would work for you.)

Maybe there is way to make two 9” boards, cut your curves and glue them to back together. With a clean enough cut with a thin kerf blade, followed up with a card scraper and sanding, and the glue joint would be next to invisible. Or, add an accent strip between the two boards. The Jig also seems to require a substantial outboard support table, not sure if that will be an issue for you but something that needs to be considered.

Or if I’m not understanding what or how the jig does what it does, then maybe coopered panels would work for you.

Good luck, I hope you find what you need or figure out a different way. Sounds like it will be cool once you get it figured out.

(Edit: I just had a look at some of your other work, you clearly know what you are doing and looking for, and probably already considered other options. Best of luck anyway.)


View zzzzdoc's profile


571 posts in 3880 days

#2 posted 07-10-2017 09:16 AM

I’ll have to check as to how much actual resaw capacity something like an MM20 or Laguna 20” bandsaw has. I thought of trying to cut two separately and glue them back together, but don’t think it will look good.

The outboard support is handled by a rare earth magnet in the base of the jig, plus some clamps, so that’s not an issue.

-- Before you criticize someone, you should walk a mile in their shoes. That way, when you criticize them, you're a mile away and you have their shoes.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics