All Replies on Is all Baltic Birch the same?

  • Advertise with us
View Bill Szydlo's profile

Is all Baltic Birch the same?

by Bill Szydlo
posted 07-08-2017 04:53 PM

11 replies so far

View Loren's profile


10718 posts in 4532 days

#1 posted 07-08-2017 05:17 PM

The Finns have a reputation for making
a better quality product than the Russians.
Flatter, and fewer voids. I’ve seen Baltic
birch delaminate inside.

View clin's profile


1121 posts in 1880 days

#2 posted 07-08-2017 05:38 PM

Where I live, no big box store carries Baltic Birch, though HD does carry birch plywood. So just in case, be sure to differentiate between Birch and Baltic Birch plywood. As far as I know, most Baltic Birch comes in 60”x60” square sheets.

I assume, given the name, that Baltic refers more or less to the region of the world where it is made. Though perhaps it is a species of birch.

I’ve used both Baltic Birch (I believe sourced from Russia and quite good) as well as a version of Birch plywood called BIMP. The BIMP is much lower quality birch plywood as compared to Baltic Birch. BIMP is the acronym for a east Asian consortium from Brunei, Indonesia, Malaysia, and the Philippines. While not near as good as the Baltic Birch, it is plenty good enough for cabinet boxes.

-- Clin

View bondogaposis's profile (online now)


5872 posts in 3235 days

#3 posted 07-08-2017 06:20 PM

I’ve never seen Baltic birch at a big box store.

-- Bondo Gaposis

View rustfever's profile


797 posts in 4194 days

#4 posted 07-08-2017 06:30 PM

My local hardwood dealer sell both Baltic Birch brand and Chinese imitation ‘Baltic Birch’.

My findings: true Baltic Birch is very stable, but I’ve found the Chinese version to be subject to warping.

I frequently use the BB for making jigs. When using the Knock-Off product, I’ve had trouble with the jigs twist and warp.

Therefore, I always insist upon BB and no longer use the knock-off stuff.

-- Rustfever, Central California

View Arlin Eastman's profile

Arlin Eastman

4544 posts in 3445 days

#5 posted 07-08-2017 06:36 PM

It depends on were it is made. There is even some called BB made in America, Mexico and other countries.

-- It is always the right time, to do the right thing.

View Bill Szydlo's profile

Bill Szydlo

72 posts in 3571 days

#6 posted 07-08-2017 06:46 PM

I was surprised that Menard’s carry Baltic Birch. On the label it says BB/CP which I think refers to the outside veneer grade rather than a manufacturer but I could be wrong.

View MrUnix's profile


8241 posts in 3083 days

#7 posted 07-08-2017 06:51 PM

BB/BB: Single piece face and back. Both face and back veneers allow 3-6 small color-matched patches on average and some light mineral streaks. Tight pin knots may be present. Inner cores are solid single piece veneers.

BB/CP: Single piece face and back. The “CP” back veneers are downgraded from “BB” grade veneers, which allow for unlimited patches and sound knots, but does not allow for open defects. Inner cores are solid birch single piece veneers.


-- Brad in FL - In Dog I trust... everything else is questionable

View Woodknack's profile


13503 posts in 3264 days

#8 posted 07-08-2017 08:42 PM

No BB at big box stores here either, just birch.

-- Rick M,

View Redoak49's profile


4923 posts in 2872 days

#9 posted 07-08-2017 08:42 PM

I agree with others and buy the real thing. I only use it for special jigs and builds. Getting the real thing makes a big difference.

For me, I have to drive about 40 miles and get mine at Owl Hardwood in Chicago. I typically buy 5×5 sheets of verbal different thickness so I always have some.

View JAAune's profile


1888 posts in 3201 days

#10 posted 07-09-2017 03:24 AM

It’s been awhile since I used plywood from Menards so I can’t remember much about it. The baltic birch the local hobby stores sell is pretty decent but the price is prohibitive at around $5 for a 12”x24”x1/4” piece. I get 60”x60” shipped to me from Raynor Rinn Scott at a much better price. Just got a bundle of 33 pieces in this week. It’s never perfectly flat and it’s not uncommon for one piece out of the bundle to have a veneer face that is brittle and flaky. There are occasional voids and I lost one part today due to a void showing up after I cut it out.

What I’ve never figured out is why the Europeans like 5’x5’ plywood. I’m just tall enough that I can grab the sheet across the span to move it. Shorter people would be hard pressed to pick up a sheet.

-- See my work at

View MrRon's profile


5942 posts in 4127 days

#11 posted 07-09-2017 03:37 PM

I believe true Baltic birch will be called “Baltic birch” and come in 60”x60” sheets. That which is not “Baltic birch” will be called just birch and come in 48”x96” sheets. When you come across cut sizes, a 24’x48’ or 12”x24”, it has been cut from a 48”x96” sheet. Cut sizes of Baltic birch will be in increments of 15” which can be cut from a 60”x60” sheet. That is about all I know about birch.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics