LumberJocks

All Replies on Purchase a 1990's Delta Unisaw

  • Advertise with us
View Honeyhole's profile

Purchase a 1990's Delta Unisaw

by Honeyhole
posted 06-12-2017 08:26 PM


21 replies so far

View jonah's profile

jonah

2080 posts in 3809 days


#1 posted 06-12-2017 09:03 PM

If it were me, I’d go in and offer $750 and be prepared to pay something more than that. I don’t think $1000 is outrageous considering the age, condition, and extras. The molding cutters aren’t useful to me, but some people use them. The dado set looks like a pretty average one. The Incra miter gauge is a very good one. Craigslist hosts very low resolution pictures so I can’t tell anything about any of those other blades in the picture.

View knotscott's profile (online now)

knotscott

8338 posts in 3886 days


#2 posted 06-12-2017 10:49 PM

$1000 isn’t bad at all for the condition and the extras. The Systimatic dado set is pretty good, and that Incra miter is excellent. Can’t hurt to ask what his best price is, but he may not need to budge much to sell it.

If you don’t land that one, have you looked into this one?
https://detroit.craigslist.org/okl/tls/6109730621.html

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View Sark's profile

Sark

197 posts in 871 days


#3 posted 06-13-2017 01:17 AM

Looks great to me. Buy it before someone else does. I just bought a stripped down 1986 Unisaw for $600 which didn’t include a fence (since I had one). I drove through pouring rain to make the purchase (also Craigslist), and three other buyers were coming over to buy, but I got there first.

View Honeyhole's profile

Honeyhole

5 posts in 859 days


#4 posted 06-13-2017 06:04 PM

Thanks for everyone’s advise. Knotscott, I’ve been watching that one as well but seems a bit too old for my liking. Now, if I can just get the seller to call me back.

View Robert's profile

Robert

3537 posts in 1991 days


#5 posted 06-13-2017 06:16 PM

Its worth what he’s asking.

My advise is put $850 in your wallet and $150 in your pocket and head over there..
Tell him you don’t really need the accessories.

I’ve been looking at older Delta Unisaws with no fence or wings I can only get the guy to $500.

-- Everything is a prototype thats why its one of a kind!!

View MrUnix's profile (online now)

MrUnix

7478 posts in 2709 days


#6 posted 06-13-2017 06:22 PM

I’ve been watching that one as well but seems a bit too old for my liking.

That $595 saw is a 1990 model… so it’s about the same age as the $1000 Unisaw… maybe just a few years older. Although, 1) It’s not a Unisaw, and 2) it’s been out there for a couple months – so it is most likely already gone and the seller just hasn’t pulled the ad.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View Holbs's profile (online now)

Holbs

2243 posts in 2540 days


#7 posted 06-13-2017 06:32 PM

To add to the confusion… my identical model (looks identical at least) Unisaw I bought for $500 but it was in rough shape that needed to be tore down and rebuilt (a fun experience actually). FYI: it is a right tilt cabinet saw, not a left tilt. To some, that makes a difference. My saw also came with Bieseymeyer fence & rails too.

-- The Carpenter Bee is derived from the Ancient Greek word wood-cutter "xylokopos/ξυλοκὀπος"

View Honeyhole's profile

Honeyhole

5 posts in 859 days


#8 posted 06-14-2017 03:01 PM

Ok. So that saw has been sold. How about this setup. Powermatic 66 with a Grizzly cyclone dust collector. A bit more than I wanted to spend but I’ve read on this site how impressive this saw is. Unfortunately the photos aren’t the best. Thanks again for your help. https://detroit.craigslist.org/mcb/tls/6157800292.html

If this doesn’t work, I may just give in and purchase a new Grizzly G1023RLX

View GR8HUNTER's profile

GR8HUNTER

6448 posts in 1223 days


#9 posted 06-14-2017 03:48 PM

OWWM Rule No. 5: In the time between finding a machine and asking others if you should buy it someone else will come to the proper conclusion. I hesitated, only 5 minutes or so, but that was long enough, I lost this:

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View jonah's profile

jonah

2080 posts in 3809 days


#10 posted 06-14-2017 04:31 PM

That is really, really steep for the Powermatic + dust collector. The dust collector costs $865 new. So he’s basically asking $2500 for a table saw plus some piping. No way in hell. You can buy a new PM2000 for that.

View jonah's profile

jonah

2080 posts in 3809 days


#11 posted 06-14-2017 04:33 PM

Here’s the Grizzly:

http://www.grizzly.com/products/1-1-2-HP-2-Stage-Cyclone-Dust-Collector/G0703?utm_campaign=zPage&utm_source=grizzly.com

A brand new 3HP PM2000 (or Sawstop, or Unisaw, etc) runs ~$3000 new.

$2500 is crazy town for that used Model 66.

View ShaneA's profile

ShaneA

7084 posts in 3109 days


#12 posted 06-14-2017 04:54 PM

Agreed over priced by more than $1000 easily. Probably more, almost qualifies as a Craigslist Posters Have Gone Nuts candidate.

View Honeyhole's profile

Honeyhole

5 posts in 859 days


#13 posted 06-14-2017 04:58 PM

You guys are truly great! So what would be an appropriate offer? He’s also include a roller outfeed table and the saw is on a mobile base. Thanks again.

View ShaneA's profile

ShaneA

7084 posts in 3109 days


#14 posted 06-14-2017 05:02 PM

A little more than $2k? Figure the saw about $1000-1200, DC $600, Accessories $200…and that is not a steal by any stretch. People are proud of the PM66 in my area.

View jonah's profile

jonah

2080 posts in 3809 days


#15 posted 06-14-2017 06:34 PM

The DC costs $875 new. His isn’t new. It looks used, but cared for reasonably well. Figure $500 for that. The saw is worth $1000. The accessories aren’t worth $200. Half that maybe.

So offer $1500. Break down the offer by item so he understands your thinking. Then when he counters with $2500 you walk away. If he gets near $1600-1700, you take it. All my opinion, of course, but you can get a perfectly nice Griz 1023 for ~$1400 shipped. That’s at your door for $1400. The PM66 is somewhat better than the Griz, but not double the price better.

View Honeyhole's profile

Honeyhole

5 posts in 859 days


#16 posted 06-20-2017 03:40 PM

How about this one? Seller say it’s a 1997..Model #36-906. He’s asking $1200 which I think is too high. am I wrong. It doesn’t look like it’s in as good a shape as the previous one. Going to check it out tonight. Thanks again.

View Fred Hargis's profile

Fred Hargis

5754 posts in 3004 days


#17 posted 06-20-2017 04:18 PM

There was a short time in the mid 90’s when Delta thought introducing a new saw means paint it a different (sometimes, only slightly different) color and throw in some extras…then bill it as the XXX saw. The XX could mean Platinum edition (the one I had) or the Grand Edition (IIRC) which is this one in the Ivory color. They advertised it with a pic of Norm standing next to the “new” tools (I think they did a BS and something else in that color). Anyway, There’s little reason to pay a premium for it being the “grand edition” (if that’s what they called it…but it’s a good solid saw…that one should probably be priced somewhat less than $1200. I do like it has the Unifence, which I preferred to the Bies.

-- Our village hasn't lost it's idiot, he was elected to congress.

View alittleoff's profile

alittleoff

541 posts in 1787 days


#18 posted 06-20-2017 04:19 PM

I’d be own my way over there especially if it’s a 3 hp. Even 2hp it’s a deal if it runs good. That’s a very good fence, the saw dosent look bad just the table scratched up some. You can make it look good as new with a little rubbing.
Gerald

View bigblockyeti's profile

bigblockyeti

5977 posts in 2231 days


#19 posted 06-20-2017 04:28 PM

$1200 doesn’t seem too high but that can depend largely on your location. Around me that would be gone pretty quickly at $1000, $1200, not quite as fast but it would likely last less than a few weeks.

-- "Lack of effort will result in failure with amazing predictability" - Me

View Holbs's profile (online now)

Holbs

2243 posts in 2540 days


#20 posted 06-21-2017 01:00 AM

$1200 for right tilt, no Bies fence, no mobile stand… I would pass and wait for a better deal or bring him down under $1k. Unless you were really needing a worth while cabinet saw. Like BigBlock says… really depends on your location and supply & demand.
(of note…I’m spoiled by the Bies, never have tried out the Unifence)

-- The Carpenter Bee is derived from the Ancient Greek word wood-cutter "xylokopos/ξυλοκὀπος"

View bigblockyeti's profile

bigblockyeti

5977 posts in 2231 days


#21 posted 06-21-2017 02:48 AM



(of note…I m spoiled by the Bies, never have tried out the Unifence)

- Holbs


I have one with a bies and one with a unifence and I prefer the uni. The adjustability and being able to slide it forward and backwards are the biggest positives. I really like the bies for being able to be placed instantly on either side of the blade without having to remove the fence rail from the body then reinstall it.

-- "Lack of effort will result in failure with amazing predictability" - Me

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com