LumberJocks

All Replies on Jet Cyclone

  • Advertise with us
View jplemons's profile

Jet Cyclone

by jplemons
posted 02-24-2017 03:24 AM


6 replies so far

View 9x9's profile

9x9

100 posts in 1798 days


#1 posted 02-24-2017 04:53 AM

Not the 2 HP model but have the Jet 1.5 HP 110v cyclone dc (only have 110v in my shop). Just got it 4 weeks ago and like it so far. It’s my first dc, before I was using shop vacs so can’t give any info as dc comparison. Don’t have any vac hose system set up in my shop, just roll it around from tool to tool for now. One thing can say about it ———-> it’s compact and don’t take up to much space for a dc and it’s a lot quieter that the shop vac. Oh and the remote is nice feature to have. I know you wanted 2 HP info but hope this is some help (probably not).

-- Youngsville, LA

View jimintx's profile

jimintx

929 posts in 2143 days


#2 posted 02-24-2017 04:56 AM

Can you obtain “fan curves” on any other dust collectors?

When I bought mine, (PM1300TX, so not in your list to consider) I didn’t seek one.
In fact, I don’t really know what one is.

-- Jim, Houston, TX

View pintodeluxe's profile

pintodeluxe

6013 posts in 3372 days


#3 posted 02-24-2017 05:08 AM

I looked over a 2hp Jet at a factory outlet, and was very impressed with the build quality.
The cone is fairly short, so I’m not sure how good separation would be.

I use a 2 hp Tempest cyclone, which I really like. It has plenty of power for a mid-sized shop. The Laguna looks tiny compared to my Tempest.

So if you can’t get a tall wall mounted cyclone, I’d say go for it. The Jet and new Laguna are probably equals. Both have nice features, but short cones.

Fan curves are important, but nearly as much as manufacturers would have you believe. If my system has 6” static pressure, it really doesn’t matter if max cfm is 1500 or 1900. But at least the graph will show you what to expect (although they are not real-world numbers). If you use 4” pipe, you will be limited to 550-600 cfm regardless.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View Fred Hargis's profile

Fred Hargis

5832 posts in 3052 days


#4 posted 02-24-2017 12:24 PM

pintodeluxe nailed it, a lot of guys fret over the performance numbers only to choke the machine to 4” ducting. At that point the other stuff is merely academic since it won’t allow max airflow anyway.

-- Our village hasn't lost it's idiot, he was elected to congress.

View Carl10's profile

Carl10

115 posts in 1015 days


#5 posted 02-24-2017 03:11 PM

jp,

I can’t put my finger on it but I was just looking at DC reviews and the Jet unit was below average. The Laguna did better but I think that was their old design. I you google Toolmetrix, he did a video on comparing the new Laguna low end models which perform much better than the old units. (Please note he only seems to review Laguna products and his separation test seemed to slowly feed the DC with fine dust – both raise questions for me). With any of the small cyclones I think you will run into separation issues. Grizzly has a reference to a Wood magazine review http://cdn0.grizzly.com/pdf/WOOD_5-13.pdf. The only problem with most reviews is that the don’t look at separation (how much dust gets to the filter) You don’t want to constantly clean your filter. For the money you may want to consider a larger cyclone or put a super dust deputy on a cart using an bag/canister style collector. Most of the real world uses of those units seem to show pretty good separation.

Hope that helps,

Carl

View jplemons's profile

jplemons

38 posts in 1744 days


#6 posted 02-24-2017 03:38 PM

Thanks, all. I have a fairly small space for my shop and would only need short runs but would try to use 6” pipe for that. I’ve seen that Toolmetrix video, which is what sparked my interest in the Laguna. The supplied fan curves look good for my purposes. I know I should bite the bullet and get something from Oneida or Clear-Vue, but those just seem too massive for my little area. The Jet seems close to the Laguna but is less expensive for the 2HP.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com