LumberJocks

All Replies on Looking for "different" way to mount an Excalibur overarm guard

  • Advertise with us
View Jason White's profile

Looking for "different" way to mount an Excalibur overarm guard

by Jason White
posted 02-18-2017 07:24 PM


5 replies so far

View Mark Kornell's profile

Mark Kornell

1170 posts in 2894 days


#1 posted 02-20-2017 12:25 AM

That arm is fairly heavy. Cantilevered out as it is, you would need a very heavy cart base to keep it up right.

However, once you get the bracket attached to the saw, the over arm part easily lifts on/off via two pivots. Assuming the weight isn’t an issue and you have some place to put it. No need for a cart.

As far as distance to blade, I’d make a permanent extension to the table saw/router wing to get the mounting point at a distance from the blade that works. And just lift the arm on/off as necessary.

-- Mark Kornell, Kornell Wood Design

View marc_rosen's profile

marc_rosen

155 posts in 3544 days


#2 posted 02-20-2017 12:54 AM

Hi Jason,
Several years ago I purchased the blade guard only and rigged it up to hang from a pivoting arm attached to the floor joists above. It worked well enough but I occasionally struck the arm with a board and it also blocked a lot of light from the cutting area.
In addition to your own idea of a cart with counter weights you could have some type of cable tether from the ceiling to help support the arm over your cutting area..
Hope you have some success soon. Marc

-- Windsurfing, Woodworking, Weaving, and Woodducks. "Most woodworkers are usually boring holes"

View alittleoff's profile

alittleoff

541 posts in 1640 days


#3 posted 02-20-2017 03:33 AM

Build something like this, or use a steel pipe with a square plate bolted to the floor. Just set the new pipe into it or over it whichever works best. You would have to incorporate a tee into it somewhere.
Gerald

View Kelly's profile

Kelly

2280 posts in 3307 days


#4 posted 02-20-2017 05:02 AM

One of the most important things you can do with that is, toss the pathetic push stick on top and replace it with a shoe.

I’m not sure I understand why a router insert and such are a problem. The exact same unit, below, has been working for me for about ten years.

I like alittleoff’s approach, but you would still have to attach it to the table. You WILL have boards hitting the guard and lifting and pushing it.

View Fred Hargis's profile

Fred Hargis

5507 posts in 2857 days


#5 posted 02-20-2017 12:19 PM

I think you’ll have a helluva time getting a mobile cart heavy enough to hold that thing. I like that tripod design, that might be a choice.

-- Our village hasn't lost it's idiot, he was elected to congress.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com