LumberJocks

All Replies on Old Fashioned Corn Planter

  • Advertise with us
View Pointer's profile

Old Fashioned Corn Planter

by Pointer
posted 02-12-2017 02:47 AM


7 replies so far

View TopamaxSurvivor's profile

TopamaxSurvivor

18658 posts in 4157 days


#1 posted 02-12-2017 04:36 AM

The one my dad had looked similar but a bit more complicated mechanism. Poke it in the ground, operate the handles, a couple kernels of corn dropped into the ground and move about 6” to do it all over again.

-- Bob in WW ~ "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

View Pointer's profile

Pointer

449 posts in 1592 days


#2 posted 02-12-2017 02:57 PM

Yes, that is the style I have in mind. How did it pull a kernel or two out of the bin?

-- Joe - I am not entirely worthless, I can always serve as a bad example.

View DaveHuber's profile

DaveHuber

49 posts in 3598 days


#3 posted 02-12-2017 03:28 PM

View Woodknack's profile

Woodknack

12891 posts in 2861 days


#4 posted 02-12-2017 05:53 PM

Google “hand corn planter patent” for pictures of the mechanism. It’s an interesting project, I hope you post updates.

-- Rick M, http://thewoodknack.blogspot.com/

View Mike_D_S's profile

Mike_D_S

595 posts in 2695 days


#5 posted 02-12-2017 06:48 PM

Pointer,

Though I’ve never seen a corn planter before, getting the kernels out of the bin is probably fairly simple using a slide mechanism like they use for gumball or M&M dispensers. Check out the project here.

The bottom of the bin should have a small hole just big enough to let a kernel or two through. Under that sits a slide with the same size hole. When you pull the handles apart, then slide will open and drop a few kernels. Closing the handles will allow a few more kernels to fall into the slide for the next hole.

There are definitely more complex mechanisms you could use that would give you exactly one (or two kernels) per hole, but this would be pretty easy and by testing a few combinations of bin hole size and slide hole size you could tune it pretty well I think.

Mike

-- No honey, that's not new, I've had that forever......

View TopamaxSurvivor's profile

TopamaxSurvivor

18658 posts in 4157 days


#6 posted 02-12-2017 08:45 PM

I haven’t seen it for over 50 years. If you Goggle patent drawings, they should have a few.

-- Bob in WW ~ "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

View Pointer's profile

Pointer

449 posts in 1592 days


#7 posted 02-14-2017 03:49 PM

Thank you all for the info. I will post the project when I get it finished.

-- Joe - I am not entirely worthless, I can always serve as a bad example.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com