LumberJocks

All Replies on Varigrind question

  • Advertise with us
View Burbs's profile

Varigrind question

by Burbs
posted 02-11-2017 08:43 PM


4 replies so far

View OSU55's profile

OSU55

2238 posts in 2347 days


#1 posted 02-12-2017 04:48 AM

Sounds like you ground a bit too much off the sides. To get a convex line front or toe to back, you will need to grind more from the nose to lower the front end of the bevel line. There’s no way to raise the back or middle part of the bevel line -the material has been removed.

View mpax356's profile

mpax356

75 posts in 2850 days


#2 posted 02-14-2017 12:13 AM

Is the flute V shaped (parabolic) or more C or U shaped? If it is the latter, you won’t have much luck with a swept back grind because the wings will get too thin and fragile.

-- MPax, Atlanta

View Skatergirl46's profile

Skatergirl46

17 posts in 954 days


#3 posted 02-14-2017 11:30 PM

This is one of the best tutorials on turning tool sharpening that I have seen. Doug Thompson also makes really nice turning tools.

https://youtu.be/ttYyulsM7wg

-- I'm happiest when I have wheels on my feet or sawdust in my hair.

View Burbs's profile

Burbs

48 posts in 1041 days


#4 posted 02-15-2017 12:01 AM

Thanks for the responses guys. I got a little carried away on the sides and I need to increase the bevel to between 35-40 so I can adjust the varigrind and clear the end. Going to have to be real gentle sharpening the sides for awhile and really watch the wings so I don’t get a catch.

On a side note, been doing all spindle work with a skew or a 3/8” bowl gouge. 1/4” and 3/8” spindle gouge are a real treat to use. Didn’t realize what I was missing.

-- ---The day I learn nothing of value will be the day I'm laid to rest--- Burbs

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com