All Replies on Artisan tools from Craft Supplies/Woodturners ??

  • Advertise with us
View Abter's profile

Artisan tools from Craft Supplies/Woodturners ??

by Abter
posted 02-08-2017 12:09 AM

6 replies so far

View Lazyman's profile


5655 posts in 2192 days

#1 posted 02-08-2017 04:41 AM

I don’t have any experience with them but my understanding is they just don’t spend as much time finishing and polishing the handles and steel as they do with their regular Henry Taylor branded tools but they have the same quality of steel in them. Perhaps the HT come ready to use but the Artisan have to be sharpened first?

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

View Wildwood's profile


2876 posts in 2939 days

#2 posted 02-08-2017 12:35 PM

They are the house brand for Craft Supplies sold by Henry Taylor. Many year ago Artisan tools were a bargain, not sure that is true today. I have owned and used a few of them. Back then those tools still made in Sheffield England. Today steel comes from China cut to size, beveled, and handled there or shipped from China already to sell. That is also true of Packard Woodworks house brand made by Hamlet. Both Henry Taylor & Hamlet tools share the same address in England. I would stay away from CS artisan tool sets.

If were in the market for 3/8” & 1/2” spindle gouges would buy Packard Hamlet house brade over Artisan brand. Packard has little better selection of bowl gouges than Artisan tools not sure on price, lot depends upon what you want. To day buy Thomson bowl & spindle gouges and make my own handles.

Boils down to how many individual tools you need and if getting a quantity discount buying them. Catalogs from both CS & PW lets you see price differences little better on individual tools versus online shopping Other vendors online often have better prices on individual name brand tools or run sales on name brand tools.

-- Bill

View Abter's profile


79 posts in 1432 days

#3 posted 02-08-2017 03:46 PM

This is good info! thanks. Both the Artisans and the Hamlets now at CS are M2. And they are fairly comparably priced for same size: ~$60 for 1/2” bowl. The “regular” 1/2” Sorby bowl gouge M2 one there is $90.

Right now I’m bidding on a “regular” Sorby 3/8” on Ebay. If I get it for ~$40 total I’ll be good for a while. If not I’ll keep searching. Hamlet’s had certainly been at the top of my list; seem at a good price point for me. T

-- "Many men fish all their lives without ever realizing that it is not the fish they are after." {often mis-quoted as by H.D. Thoreau}

View TheDane's profile


5829 posts in 4468 days

#4 posted 02-09-2017 01:39 PM

I have a couple of Hamlet tools from Craft Supplies … a 1/2” bowl gouge and 3/8” spindle gouge. They both have ‘Sheffield, England’ stamped on the shaft. I have had them about two years, and feel they were both an excellent value.

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"

View bigJohninvegas's profile


788 posts in 2267 days

#5 posted 02-12-2017 07:54 AM

If you can confirm that the tool is made with sheffield steel, the material quality will be good. Sorby, Crown, Henry Taylor. All the same steel. Best price wins.

So in the case of artisan tools. I just went to craft supplies web site. compared a basic 3/8 bowl gouge with some of the name brands. All had 6” flutes, and Hamlet was cheapest, followed by Artisan. I only compared the 4 tools I listed, and tried to keep it simple. No Signature tools, etc. Notice the Artisan, and Henry Taylor both are what they call the Superflute gouge.

-- John

View Wildwood's profile


2876 posts in 2939 days

#6 posted 02-12-2017 08:35 PM

Think will find many steel mills have closed down in Sheffield England what they do make is more exotic steels for industrial use. Notice they mention PM tools from Hamelt sold by Packard Woodworks. Sorby only brand listed in UK making M2 HSS tools, all other claim to make there steel there.

-- Bill

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics