All Replies on Jointer Knives Setting Jig

  • Advertise with us
View Roger's profile

Jointer Knives Setting Jig

by Roger
posted 02-03-2017 02:04 PM

14 replies so far

View recycle1943's profile


4593 posts in 2428 days

#1 posted 02-03-2017 02:28 PM

Roger – Too simple, can’t possibly work, right ? lol
I don’t have a jointer but it did give me a one handed way to set the in/outfeed tables on the planer.

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View kiefer's profile


5731 posts in 3473 days

#2 posted 02-03-2017 02:40 PM

That’s been around for some time and it works .
Thanks for putting up the link .

-- Kiefer

View lew's profile


13148 posts in 4561 days

#3 posted 02-03-2017 03:09 PM

That’s pretty cool, Roger! Thanks!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View eddie's profile


8565 posts in 3420 days

#4 posted 02-03-2017 04:40 PM

Thanx Roger ,

-- Jesus Is Alright with me

View Jerry's profile


3402 posts in 2454 days

#5 posted 02-03-2017 07:12 PM

I posted a video on this two years ago.

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be.

View doubleDD's profile


9539 posts in 2849 days

#6 posted 02-03-2017 11:55 PM

You have a winner there Roger. They are the simplest to make and work like a charm.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View Grumpy's profile


26509 posts in 4657 days

#7 posted 02-04-2017 12:39 AM

I like it Roger, thanks.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View builtinbkyn's profile


3009 posts in 1746 days

#8 posted 02-04-2017 01:07 AM

I made them and they work. I believe I got the idea from one of the online magazines. He must have as well ;)

-- Bill, Yo! Brooklyn & Steel City :)

View Tooch's profile


2013 posts in 2682 days

#9 posted 02-04-2017 01:14 AM

Awesome, Roger. I’m just getting ready to switch over the knives in my Delta, I’ll def try this!

-- "Well, the world needs ditch-diggers too..." - Judge Smails

View Andre's profile


3626 posts in 2612 days

#10 posted 02-04-2017 05:51 AM

My old Hitachi F1000 has spring loaded blades with just a simple plastic retainer gauge to set them. Makes me wonder why this design is not used today, to simple? I guess with all the new machines coming out with helical heads there won’t be any need to st blades.

-- Lifting one end of the plank.

View Jim Jakosh's profile (online now)

Jim Jakosh

24958 posts in 3911 days

#11 posted 02-09-2017 03:36 AM

Thanks, Roger. This will be very helpful for me when setting the knives on our old Craftsman jointer in the Az shop. It does not have an adjustable outfeed table!!

cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View Rayne's profile


1314 posts in 2345 days

#12 posted 02-09-2017 03:40 AM

I built the same thing when I was refurbing my jointer a few years ago. It really works well!

View lennyk's profile


34 posts in 1638 days

#13 posted 02-09-2017 10:04 AM

great jig, I made a similar one from someone else’s design but it used small magnets inset into the wood which was a pain to glue in
this is easier as it doesn’t make any difference if the magnets are on the outside once they are all the same thickness

he marked the top center blade position on the masking tape,
the jig I copied had a little lip to keep the jig leftmost against edge of bed and the top blade position was marked on the wood above the magnet

View EricTwice's profile


248 posts in 1339 days

#14 posted 02-09-2017 11:55 AM

I have always used a scrap of 1/2 in material that is milled straight. It works great if you have height adjustment screws. If you don’t, this is much better. It looks quick and easy, I will have to try this, I wonder how it works with carbide knives.

I will have to straighten the gibs first. they have been over tightened so much that they are warped, again.

-- nice recovery, They should pay extra for that mistake, Eric E.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics