LumberJocks

All Replies on 1999 Jet Model JSG-1 1"x42" Belt Sander (Disk too)

  • Advertise with us
View Cathie Zimmerman's profile

1999 Jet Model JSG-1 1"x42" Belt Sander (Disk too)

by Cathie Zimmerman
posted 02-03-2017 04:13 AM


5 replies so far

View jimintx's profile

jimintx

929 posts in 2144 days


#1 posted 02-03-2017 05:59 AM

I figured I could find what you are seeking, cuz I always think I can find almost anything – and dang! I am stumped as well.

I did get some related hits by calling it a “JSG-1 Grinder” instead of a sander. I think these are often used for what would be called a grinding application, even though they employ sandpaper style abrasives.

I have the cheap HF version of that machine, with 1” x 30” belt and no disc, and I really like having it sit on one of my counters for random touch ups on edges and tips and so on.

Good luck with it, I think you have a nice piece there.

.

-- Jim, Houston, TX

View Ripper70's profile

Ripper70

1361 posts in 1468 days


#2 posted 02-03-2017 06:12 AM

Looks an awful lot like this one here. Maybe this could help.

-- "You know, I'm such a great driver, it's incomprehensible that they took my license away." --Vince Ricardo

View Ripper70's profile

Ripper70

1361 posts in 1468 days


#3 posted 02-03-2017 06:28 AM

Or, check this out! Grizzly G1013.

-- "You know, I'm such a great driver, it's incomprehensible that they took my license away." --Vince Ricardo

View kathy50's profile

kathy50

15 posts in 643 days


#4 posted 05-27-2018 04:55 AM

The Jet Benchtop Disc and Belt Sander cannot be used for wet sanding. Check out the top 10 best belt sander in 2018.

-- https://drillly.com

View robscastle's profile

robscastle

6548 posts in 2764 days


#5 posted 05-27-2018 09:31 AM

Kathy,

The belt replacement should be fairly straightforward.
Check the direction arrow inside the belt it shows the rotation direction.
Take the bottom cover off and fit it over the drive drums and any idler wheels.
There should be spring loaded tensioner somewhere make sure it is released and fit the belt release it and the belt should be tight, if not installation is incorrect so try again.

If all is OK now locate the tracking screw it should be a cam or maybe a knob then rotate the belt by hand and see if it makes any scraping noises looks like it is going to run off at power on.
If so adjust the tracking mech slightly and turn by hand again if all is OK power it up and be prepared to do any tracking adjustments quckly, once its running and staying on stationand there are no odd noises and all sounds OK you done!

I will also go look for a manual but I would think the Grizzly link Ripper70 pointed you to will be a generic guide in principle.

There is a PDF manual at:-

Belt and Disc Sander www.mikestools.com/.../Jet…manuals/Jet%20Sanders/M-577003%20J-4002%20Belt-...

Also if your still not purring,
There is a couple of youtube videos on 2” models and I see Matthias Wandel built his own, ... what a surprise eh! no doubt he may have some detailed info there worth checking out.

-- Regards Rob

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com