LumberJocks

All Replies on Anyone hav experience with a Delta 2000 series table saw?

  • Advertise with us
View JCamp's profile

Anyone hav experience with a Delta 2000 series table saw?

by JCamp
posted 02-02-2017 02:43 AM


16 replies so far

View JCamp's profile

JCamp

981 posts in 945 days


#1 posted 02-02-2017 02:44 AM

He’s some pictures

-- Whatsoever thy hand findeth to do, do it with all thy might

View JCamp's profile

JCamp

981 posts in 945 days


#2 posted 02-02-2017 10:48 PM

Bump

-- Whatsoever thy hand findeth to do, do it with all thy might

View Laish's profile

Laish

1 post in 873 days


#3 posted 02-03-2017 01:17 AM

I just picked up the same one I saw on Craigslist a few weeks ago to replace the Craftsman I had. Mine came with the mobile base and a 6” Delta stacked Dado set. He also had the original manuals. I paid $400 for the on I got. It was like brand new and was kept in a heated basement workshop it’s entire life. I felt that $400 was a really good deal. I’m upgrading the fence soon. I would check out the fence alignment. The rear rail had slight warping and made it difficult to adjust so that it just floated above the table. In fact when I took the rear rail off, it was so warped it looked like a recurve bow. One thing that I just noticed the other day was the measuring tape on the front rail seems to stretch a bit as you move further along it. When the saw blade is set against the blade, the tape measures dead on zero exactly. By the time you get to 6 or 7 inches it’s off nearly a 32nd of an inch. By the time you get to the end it’s 3/32.

None of this really bothered me because I had already planned on replacing the fence. I just have to double check with a tape. I saw this exact saw many years ago on the New Yankee Workshop for the garage workshop build and really wanted one. It also appeared on NYW Table Saw 101. When I saw this pop up on CL, I jumped on it fast. From what I understand, the ones that replaced this weren’t very good. I don’t know how much truth to that there is however. If it’s in good shape I would say grab it for $300.

View ArtMann's profile

ArtMann

1385 posts in 1211 days


#4 posted 02-03-2017 03:25 PM

I prefer a saw that has cast iron wings. The lack of them devalues the saw somewhat.

I understand the lack of good used woodworking equipment. There just isn’t much available where I live.

View knotscott's profile

knotscott

8290 posts in 3770 days


#5 posted 02-03-2017 03:40 PM

That’s a decent basic contractor saw. Back when they were still made in the USA, right? Do you know what fence is on it? $300 with a Biese or Unifence would be a nice deal IMO. Still might be with the generic stock fence, but less of a deal. Condition is important to value too. What city are you nearest to?

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View JCamp's profile

JCamp

981 posts in 945 days


#6 posted 02-03-2017 06:03 PM

I did contact the guy. He won’t go below 300. Said he’s the original owner and he bought it around 15 years ago.
Nearest city to me is chillicothe Ohio. Im actually about 40 min south of there tho. The saw is on the east side of Columbus It’s at least an hour an 40min from me. I’ve tried finding one local but not much luck. I did find a craftsman 113 for a 100$ but the guy must has sold it cause after I talked to him one day he never answered my calls or texts

-- Whatsoever thy hand findeth to do, do it with all thy might

View toolie's profile

toolie

2155 posts in 3023 days


#7 posted 02-04-2017 11:20 AM

Seems like a lot for a very old style right tilt contractor saw. I’d pass.

-- there's a solution to every problem.......you just have to be willing to find it.

View JCamp's profile

JCamp

981 posts in 945 days


#8 posted 02-05-2017 10:48 PM

I passed on it. To far away An seemed lik he was on the high end of the value of the saw.
The guy that originally had the 113 on Craigslist reposted it. I contacted him and offer $80 and he took it. Came with everything but the owners manuals… even a dado insert. It’s in good shape minus a small bit of rust on the top and it has the sheet metal style sides on it instead of the case iron ones. Over all seems lik a really good saw for $80 and was close to my house It was a lot of an improvement over my old saw

-- Whatsoever thy hand findeth to do, do it with all thy might

View mrbaron123's profile

mrbaron123

2 posts in 552 days


#9 posted 12-20-2017 11:34 PM

Anyone know where I can get a Users Manual for a Delta Series 2000 Table Saw?

View MrUnix's profile

MrUnix

7388 posts in 2594 days


#10 posted 12-20-2017 11:55 PM

Well, first off, that’s not a TS200 (saw pictured in the OP)... the TS200 is a “shopmaster” plastic benchtop saw. As for a manual, I’ve never heard of a Series 2000 from Delta, so get the real model number and finding a manual should be easy.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View ohtimberwolf's profile

ohtimberwolf

931 posts in 2747 days


#11 posted 12-21-2017 02:01 AM

Here is some info. larry

http://lumberjocks.com/topics/60266

-- Just a barn cat, now gone to cat heaven.

View Woodknack's profile

Woodknack

12814 posts in 2775 days


#12 posted 12-21-2017 05:58 AM



Anyone know where I can get a Users Manual for a Delta Series 2000 Table Saw?

- mrbaron123

You should start a new post for the question. Bumping an old post will confuse people who try to answer a question that isn’t relevant anymore.

-- Rick M, http://thewoodknack.blogspot.com/

View Gizmo1's profile

Gizmo1

1 post in 489 days


#13 posted 02-22-2018 02:11 AM

View WoodClaimer's profile

WoodClaimer

1 post in 340 days


#14 posted 07-20-2018 11:27 PM

I recently picked up the same saw as the one picture: a 2000 series Delta Contractor saw. Thus far has been good, starts up quiet, has a bump switch I can hit with my knee (in order to turn it off). It’s got rollers that make it easy to move around. came with the basics (just what was attached when originally purchased). I paid $100.00 for it and drove a half hour to pick it up. It was super clean, looked hardly used. Though the man I bought it from also got it used. He was selling it cheap due to the fact that somewhere along the line the fence had dropped and hit the floor, breaking it and rendering it pretty much useless. I don’t think the saw has much use on it. However looking around for used parts has become an annoyance.

View David_H's profile

David_H

91 posts in 1713 days


#15 posted 07-21-2018 03:17 AM

If you are anywhere near this I would give it a thought, If i didn’t already have a Powermatic 66, 65, and two Craftsman 113 saws I be all over it lol.
https://lexington.craigslist.org/tls/d/delta-rockwell-unisaw-table/6646960072.html

View JCamp's profile

JCamp

981 posts in 945 days


#16 posted 07-21-2018 01:19 PM

I appreciate the info guys but I posted this over a year ago. Since then I bought a craftsman 113 and really like it. Best $90 I’ve ever spent. Lol.
I may upgrade at some point. That’ll probably b a sawstop because in a few years my kids will b old enough to wanna work with me and I’d like the extra assurance that if they do make a careless move they will still have all their fingers

-- Whatsoever thy hand findeth to do, do it with all thy might

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com