All Replies on Bosch bench top table saw any good?

  • Advertise with us
View seadonkey's profile

Bosch bench top table saw any good?

by seadonkey
posted 01-31-2017 04:00 AM

6 replies so far

View GAwoodworker's profile


37 posts in 1379 days

#1 posted 01-31-2017 08:26 PM

I have a smaller shop and use that exact saw. I’ve had it for about a year and a half. Overall, I have been happy with it. Takes some time to tune up but it’s well worth it. The fence is just OK but surely usable. You get a good blade for it, your cuts will be crisp. A few weeks ago I tried something new. I’ve been using a 10” Avanti 60-tooth but switched to a Diablo 7 1/4 blade. While not a deep cut, it leaves a great finish on the wood. The Diablo is thinner as well so its not taking away as much material.
I first bought it cause I was doing reno work and could easily transport it. As I’ve focused more on woodworking, its still the saw I use. It handles sheet goods well and has no problem ripping stock for cutting boards and what not. I think it can take a dado stack too. It is loud so please wear ear protection. The miter gauge is crap. I made a better one out of scraps.
I would try to negotiate a little lower. Make sure all the accessories are with it. You can probably find a list of them online. I find that I have the most control with a table saw than a circular.There are many jigs and plans you can find online that take a table saw and make it do all sorts of crazy things. Jointing stock, making angled cuts, perfectly repeated cuts, dados, etc. A lot of it comes down to what type of projects you wanna do. If you’re making 2×4 frames for stuff and just using plywood, you could probably get by without a table saw. If you want to do nice woodworking (like keepsake boxes, picture frames, furniture) then a table saw is a must. I don’t know if I’d trust myself with a circular saw and a nice piece of walnut. Just my 2c.
Hope this helps ya out!
God Bless

View knotscott's profile


8364 posts in 3986 days

#2 posted 01-31-2017 09:42 PM

The Bosch is among the best of the portables, but a small skill set and small budget are the wrong reasons to buy one. A full size stationary saw offers a lot of advantages, and doesn’t really take up all that much more room. There are good options for no more than a new Bosch costs.

The ABCs of Table Saws

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View Loren's profile


10477 posts in 4258 days

#3 posted 01-31-2017 10:02 PM

Any table saw will allow ease in narrow repeat
ripping. It will allow cutting tenons, half
laps and other joints a miter saw won’t do
as well if at all. As a convenience for ripping
solid wood, choosing between a table saw
and a band saw is a wash, imo, but the band
saw requires more ongoing fuss to keep
the cuts straight.

I say buy it. You can buy a vintage stationary
saw but the Bosch will do and you can take
it outside when the weather permits.

>> Bosch is a reliably good brand.

View cicerojoe's profile


64 posts in 4056 days

#4 posted 01-31-2017 11:53 PM

I have that saw and I like it a lot. I don’t think you can go wrong with that deal. I would jump on it.

-- John from the Cherry Valley Studio in NY

View seadonkey's profile


20 posts in 1098 days

#5 posted 02-01-2017 12:49 AM

Thanks so much for all the advise fellas!

Ive decided to try and buy it…. But naturally the guy isn’t responding

-- I mostly make firewood...

View Jake04353's profile


2 posts in 1136 days

#6 posted 02-01-2017 01:51 AM

I’ve bought and sold a few Bosch 4000 table saws, they’re fantastic and sell used up here in Maine for $250 all day long. That one looks like a newer Bosch table saw. Dido on the Diablo blades. If you get a 10’’ you might be able to use it on your chopsaw or sliding compound miter saw too. Great blades that clean up nice with 1:4 mixture of simple green and water.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics