All Replies on 41" spalted Mapple log... How to cut and transport?

  • Advertise with us
View PJwood's profile

41" spalted Mapple log... How to cut and transport?

by PJwood
posted 01-29-2017 03:54 PM

6 replies so far

View avsmusic1's profile


665 posts in 1572 days

#1 posted 01-29-2017 07:48 PM

are you looking to slab it or turn it into dimensional boards

this sounds like a good excuse to get an Alaskan chainsaw mill set up for slabs :)

View William Shelley's profile

William Shelley

609 posts in 2356 days

#2 posted 01-29-2017 08:23 PM

I’m assuming you aren’t trying to get slabs with two live edges. If that is the case, you should be able to freehand rip cut the log with your chainsaw.

I have only a 20” bar on my chainsaw so my approach would likely be to trim a little off the log, creating a flat, flip it over and make another flat parallel to the first. That would reduce the thickness by a few inches allowing me to get my 20” bar past the center by a little so I could cut the log into two halves.

Alternatively you might want to just do rip cuts with the chainsaw to square up the log enough to fit it into your 28” woodmizer

-- Woodworking from an engineer's perspective

View PJwood's profile


27 posts in 4495 days

#3 posted 01-30-2017 01:21 AM

hi Avsmusic, well i am happy with whatever i can extract. I got some nice live edges from the branches already. I tried an Alaska Chainsaw years ago and was not really good at it.

Williams: thanks that is a great tip ! I had not though of that! I was just going to quarter it in the middle and then divide each half in to.

Has anyone tried to kerf and split such a big log ?

-- Delicately crafted firewood specialist

View BulldogLouisiana's profile


326 posts in 2027 days

#4 posted 01-30-2017 01:49 AM

Good luck. Spalted Maple is one of my favorites. I’d do like William suggested. Good luck with the maple.

-- There are 10 types of people in the world. Those who understand binary and those who don't.

View Shawn Masterson's profile

Shawn Masterson

1325 posts in 2835 days

#5 posted 01-31-2017 02:09 AM

two ways I know of.



#1 seems time consuming, but a classic.
  1. 2 looks like a good ole hold my beer and watch me piss off the neighbors kind of time.
View PJwood's profile


27 posts in 4495 days

#6 posted 01-31-2017 04:02 AM

#1 is impressive! Those guys are skilled and patient! But at the rate they use the wood it must take a forest to make their Viking boat! #2 looks fun, but not for me, not sure they can make it into boards.

Williams technique sounds the best!

-- Delicately crafted firewood specialist

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics