All Replies on new branding iron

  • Advertise with us
View bobasaurus's profile

new branding iron

by bobasaurus
posted 01-28-2017 09:46 PM

7 replies so far

View Woodknack's profile


13439 posts in 3185 days

#1 posted 01-29-2017 01:37 AM

Badass. Bet it takes a minute to heat that chunk of brass.

-- Rick M,

View bobasaurus's profile


3644 posts in 3989 days

#2 posted 01-29-2017 02:16 AM

Thanks. It took a good 15 minutes before it was barely hot enough to burn. But it keeps its heat a long time, I guess good if I’m burning more than one thing, though I usually make one thing at a time.

-- Allen, Colorado (Instagram @bobasaurus_woodworking)

View TheFridge's profile


10859 posts in 2291 days

#3 posted 01-29-2017 02:25 AM

Pretty sweet. How much did that booger cost if you don’t mind me asking?

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View bobasaurus's profile


3644 posts in 3989 days

#4 posted 01-29-2017 03:37 AM

It was $130. Their electric model was too steep for me, so I did it myself.

-- Allen, Colorado (Instagram @bobasaurus_woodworking)

View Mark Shymanski's profile

Mark Shymanski

5623 posts in 4517 days

#5 posted 02-26-2017 06:57 AM

That is a pretty good deal. Did you send them a digital file they ran through the CNC or did you have to work with them to come up with a design? When you mounted the soldering iron, did you mount it perpendicular to the back or parallel with the badk? I ask ‘cause I am wondering if one orientation tor the other may make for a better heat transfer from the iron to the brass. I would think that one it got hot it could do a number of brands before it needed to be reheated again.

-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2

View bobasaurus's profile


3644 posts in 3989 days

#6 posted 02-26-2017 07:15 AM

Mark, I sent them a drawing of the logo I’d made (vector image file, made in inkscape). I guess the flat plane with the engraved logo is perpendicular to the soldering iron shaft. It was still hot enough to brand for like 10 minutes after unplugging. Serious thermal mass.

-- Allen, Colorado (Instagram @bobasaurus_woodworking)

View KelleyCrafts's profile


4240 posts in 1544 days

#7 posted 02-27-2017 04:54 PM

Sweet Allen! Looks great!

-- Dave - - pen blanks - knife scales - turning tools

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics