LumberJocks

All Replies on PM-V11 chisel steel - it is that good

  • Advertise with us
View Kirk650's profile

PM-V11 chisel steel - it is that good

by Kirk650
posted 01-26-2017 01:27 AM


7 replies so far

View Lemwise's profile

Lemwise

91 posts in 1094 days


#1 posted 01-26-2017 07:13 PM

PM-V11 is awesome. The better wear resistance is especially noticeable when planing the sides of plywood.

View Fred Hargis's profile

Fred Hargis

5682 posts in 2970 days


#2 posted 01-26-2017 07:22 PM

I’ve never used a LN, but the members here convinced me to get the PM-V11 when I bought a set of Veritas chisels, I haven’t regretted spending the extra money, not even a little bit.

-- Our village hasn't lost it's idiot, he was elected to congress.

View dbray45's profile

dbray45

3320 posts in 3254 days


#3 posted 01-26-2017 08:07 PM

I love their new blades. The steel is almost like the tool steel from the ‘40s and ‘50s.

-- David in Damascus, MD

View Bill White's profile

Bill White

5224 posts in 4438 days


#4 posted 01-26-2017 08:39 PM

Good old cast steel in my shop. Might not be the most exotic, but it sure does cut the wood.
BTW, most old cast steel items are about $10.00 each.
Bill

-- [email protected]

View them700project's profile

them700project

170 posts in 1496 days


#5 posted 01-26-2017 08:40 PM

I have been building my collection around PMV11. And though I dont have anything to compare it too i do love the fit,finish, and feel of my chisels and planes

View Kirk650's profile

Kirk650

663 posts in 1226 days


#6 posted 01-27-2017 02:15 AM

One thing I didn’t do while chopping dovetails yesterday was ease the sharp edges on the Veritas chisels. Cut my fingers in 4 places. I eased the edges this morning. The edges were quite sharp. The LN and Pfiel edges apparently had already been eased, but I worked on em anyway.

View Marcial's profile

Marcial

169 posts in 1023 days


#7 posted 01-27-2017 04:02 AM

I purchased a Veritas #7 jointer with the PMVII blade for leveling out a maple/oak side grain benchtop. My Japanese planes were all too short to work well as jointers. It’s an awesome tool-a beast yet produces shavings as delicate as anything else I have and has not needed sharpening since purchased Nov. 2016.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com