All Replies on What Screws to Use. Part 2

  • Advertise with us
View karie's profile

What Screws to Use. Part 2

by karie
posted 01-25-2017 08:07 PM

5 replies so far

View Fred Hargis's profile

Fred Hargis

5838 posts in 3058 days

#1 posted 01-25-2017 08:15 PM

Those screws will work fine, though you don’t really need the YZ version (won’t hurt, but may be paying extra for it). On a 24” deep cabinet, I would probably use 3 on each shelf. put them back a little from the edge so you don’t get a split, and try to center them fairly well across the thickness for the same reason.

-- Our village hasn't lost it's idiot, he was elected to congress.

View bobasaurus's profile


3616 posts in 3748 days

#2 posted 01-25-2017 08:18 PM

I recently bought a big set of “GOLD STAR MULTIPURPOSE STAR DRIVE SCREWS” from this obscure site:

They’re great and pretty cheap, shipped free with my quantity too. The self drilling point and reaming shank are perfect for my use. They have the partial thread that works well for not separating two panels while driving in the screw.

-- Allen, Colorado (Instagram @bobasaurus_woodworking)

View Lazyman's profile


4203 posts in 1952 days

#3 posted 01-25-2017 09:01 PM

Some of the answers to your questions may depend upon the joints you are using (dado/groove, rabbet, butt?). For dado joints for example, since you are using glue, you may not need any screws unless you do not have a way to clamp the joint.

While partial thread will insure that 2 pieces are pulled together snuggly, for 3/4” boards that won’t make much difference. Since you are using glue, 1 1/2” long should be long enough. The number of screws needed depends upon the joint and the expected load.

Also, this may be obvious but even though the description of that screw you provided a link for says no pre-drilling is required you should pre-drill to avoid splitting and it make it easier to make sure that screw actually goes where you want it. I also think of the SPAX screws more as construction grade screws though I have used them for interior projects as well. For something a little nicer , though not much, I typically lean towards the Pro Crafter wood screws I can get at my local Lowes ( I could not find them on their website) but the SPAX screws will work fine. Neither the SPAX or the Pro Crafter has a head that I would want visible on a finished piece.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

View karie's profile


14 posts in 1407 days

#4 posted 01-25-2017 10:23 PM

The YZ version was the only option available at my hd. And i was wondering about pre-drilling even though they say not necessary. Better safe than sorry on that one. I feel better about going forward now. Thank you all for your advice!

View ArtMann's profile


1447 posts in 1380 days

#5 posted 01-26-2017 01:58 AM

If you are not trying to build a show piece, you ought to consider building it with pocket hole screws. There is no need for dadoes and the assembly is very fast.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics