LumberJocks

All Replies on How to get consistent tone in poorly-matched cherry boards

  • Advertise with us
View GeoffKatz's profile

How to get consistent tone in poorly-matched cherry boards

by GeoffKatz
posted 09-15-2016 12:49 PM


4 replies so far

View bonesbr549's profile

bonesbr549

1584 posts in 3609 days


#1 posted 09-15-2016 01:07 PM

I love love love cherry! Its mostly what i work with. I made a hutch for my wife, that to get consistent color bought a whole flitch. Obviously you can’t always do that and I’ve worked with many pieces that I’ve done where color can be an issue.

One question is is it kiln dried and was it steamed. Steemed cherry is a little different beast and I avoid if possible.

Good news is it will all even out over time. On the other hand sap wood will become more pronounced.

If you can’t wait for that evening out, then I’d suggest toning the lighter cherry or whole piece with dye’s (not stain). You can do a lot to even out color with dyes and once you do your top coats you will never know.

I’d reccomend Charles Neil’s dvd’s on dyes and finishing worth every penny and a nickle more. I use his recipe on cherry that is awesome

First Link is a bed where the 12/4” post material was very different from the rail material. Wife wanted it to look 100 years old right away so color.

https://www.flickr.com/gp/[email protected]/oTDup3

The Second link is the hutch that is just natural cherry.

https://flic.kr/s/aHsjDQLAxi

Some of the boards are darker and you can tell. However in the three years since that pic was taken they have gotten darker and are getting closer to being seamless, but in all honesty it looks awesome and everybody loves it that see’s it and wants me to build one just like it….. till i tell them how much it will cost. :)

Good luck.

-- Sooner or later Liberals run out of other people's money.

View GeoffKatz's profile

GeoffKatz

26 posts in 1541 days


#2 posted 09-15-2016 01:16 PM

Thanks! I love cherry as well, but I need some practice on working with it for sure. I believe mine is kiln-dried. I know it will darken over time, but I think it could take several years, which I don’t want to wait for.

I’ve never worked with dyes before (I’m pretty new to the entire business). Are there any specific products that work well for cherry I should look for? Would the new cycle be washcoat → dye → poly? Do dyes apply similarly to stains?

I certainly will take a look at Charles Neil and other resources as well.

View Kirk650's profile

Kirk650

674 posts in 1290 days


#3 posted 09-15-2016 01:55 PM

My favorite dye for cherry is JE Moser’s Dark Wine Cherry. It’s water soluble, and I apply with a foam brush. That’ll help you even out the shading. Over that I apply a coat of Watco Danish Oil as a sealer, followed by 4 coats of Waterlox Original satin. All applied with foam brushes. Allow two days for the Danish Oil to fully dry before you put the Waterlox over it.

View bbasiaga's profile

bbasiaga

1243 posts in 2537 days


#4 posted 09-15-2016 03:49 PM

Garnet shellac is also popular over cherry. You could experiment with that to see how well it evens out.

Brian

-- Part of engineering is to know when to put your calculator down and pick up your tools.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com