LumberJocks

All Replies on Spraying lacquer over lacquered cabinets

  • Advertise with us
View sawedoff's profile

Spraying lacquer over lacquered cabinets

by sawedoff
posted 09-07-2016 04:52 PM


4 replies so far

View CharlesNeil's profile

CharlesNeil

2499 posts in 4404 days


#1 posted 09-07-2016 05:52 PM

Yep shouldnt be an issue, just be sure to clean them well, first , I prefer naphtha, apply a good wet coat, wipe off with a clean cloth, then repeat, alcohol dries a little too fast for me to get on and off.

View HerbC's profile

HerbC

1801 posts in 3393 days


#2 posted 09-07-2016 06:06 PM

First verify that the existing topcoat is lacquer. Rub an inconspicuous spot with a cloth dampened with lacquer thinner. If the thinner desolves the existing finish then it is lacquer and you should be able to recoat with lacquer after cleaning the surfaces well as CharlesNeil indicated. If it’s not lacquer you can probably get away with using a coat of dewaxed shellac as a sealcoat that will allow the new lacquer adhere to the surface.

Good Luck!

Be Careful!

Herb

-- Herb, Florida - Here's why I close most messages with "Be Careful!" http://lumberjocks.com/HerbC/blog/17090

View pintodeluxe's profile

pintodeluxe

5995 posts in 3347 days


#3 posted 09-07-2016 06:54 PM

It is a big job, but I have done it. Tinting has its share of headaches, and is probably the most difficult spray finishing technique to get right. For example, if you get a run or sag in the finish, the color will be concentrated there.

I sprayed two coats to go from honey oak to a medium brown color. I didn’t do a clear topcoat, and have had no durability issues. I would say choose a satin sheen lacquer, as the gloss really builds up with multiple coats.

Here are pictures and more info if you’re interested…
http://lumberjocks.com/projects/63811

Good luck!

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View 000's profile

000

2859 posts in 1433 days


#4 posted 09-07-2016 07:46 PM

Inside corners are the hardest. Devise a plan to get the corners first (both sides) then spray the field carefully blending into the corner, but not double overlapping the first coat.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com