All Replies on Help me figure out how this was finished!

  • Advertise with us
View MasterofSavagery's profile

Help me figure out how this was finished!

by MasterofSavagery
posted 09-07-2016 12:55 PM

2 replies so far

View Planeman40's profile


1519 posts in 3641 days

#1 posted 09-07-2016 02:32 PM

The top photo appears to have been lightly sand blasted, possibly with an “air eraser” ( or a small sand blaster.

The bottom two photos most likely are oil finished like with Watco Danish oil finish or tung oil. Tung oil is an interesting product. It is an oil from the tung nut that is a liquid when applied and rubbed in but turns to a wax when exposed to air for a length of time. That being said, store it with as little air in the container as possible or it will turn to a wax inside the container. Fill the container with glass marbles, nuts and bolts, or almost anything to raise the liquid tung oil to the very top of the container before closing it. Or pour it into a smaller container.


-- Always remember: It is a mathematical certainty that half the people in this country are below average in intelligence!

View MasterofSavagery's profile


2 posts in 1507 days

#2 posted 09-07-2016 10:32 PM

Awesome! Thanks so much, really appreciate it!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics