All Replies on Plastic workbench?

  • Advertise with us
View fkoehler's profile

Plastic workbench?

by fkoehler
posted 09-06-2016 12:45 PM

3 replies so far

View Lazyman's profile


4229 posts in 1955 days

#1 posted 09-06-2016 03:38 PM

Unless floor space is an issue, I think that I would just leave the little table saw on its current stand and make a separate router table. Look around at some of the various portable router table designs. You can easily make (or buy) one that attaches to or sits on your work bench for example. They don’t have to be a stand alone design. I’ve used one for years that is not much more than a piece of 3/4” plywood with a hole drilled through it for the bit and a recess routed in the bottom for the mounting the router that I simply clamp to a corner of my bench. When it is not in use, just lean it against a wall or the the workbench. There are many other more ingenious designs out there.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

View fkoehler's profile


2 posts in 1198 days

#2 posted 09-08-2016 12:18 AM

Thanks Lazyman.

I think I’ll do that for now, and after some use see how that works for me.

View RandyinFlorida's profile


257 posts in 2635 days

#3 posted 09-08-2016 12:16 PM

Just bought this Grizzly Router table. Very pleased; add some wheels and your good to go. Couldn’t believe how thick (strong) the table top is. At $119.00 + shipping. It’s hard to beat.

-- Randy in Crestview Florida, Wood Rocks!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics