LumberJocks

All Replies on Joint wide boards trick

  • Advertise with us
View Robert's profile

Joint wide boards trick

by Robert
posted 09-05-2016 12:25 PM


9 replies so far

View GR8HUNTER's profile

GR8HUNTER

6076 posts in 1100 days


#1 posted 09-05-2016 03:01 PM

confused ? as normal ..LMAO

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View ohtimberwolf's profile

ohtimberwolf

931 posts in 2740 days


#2 posted 09-05-2016 03:18 PM

Did you glue that on?

-- Just a barn cat, now gone to cat heaven.

View Aj2's profile

Aj2

2266 posts in 2185 days


#3 posted 09-05-2016 03:32 PM

Since you will have to flip the board end for end will that not put the grain against the cut?
Better off learning how to use a handplane.And doing the minimal amount of work to get a face ready for the planer.

Aj

-- Aj

View pintodeluxe's profile

pintodeluxe

5934 posts in 3201 days


#4 posted 09-05-2016 03:38 PM

Yep, it works. As far as AJ’s comment, you can still send the board either way through the planer. So no more cause for concern with tearout (no more than normal).

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View Robert's profile

Robert

3397 posts in 1868 days


#5 posted 09-05-2016 11:08 PM

AJ, no issues with grain you just send the board through the planer either direction.

The board supports the jointed face. After that you flip and plane off the ridge.

-- Everything is a prototype thats why its one of a kind!!

View Aj2's profile

Aj2

2266 posts in 2185 days


#6 posted 09-06-2016 03:50 AM

Yes that is very cleaver.

-- Aj

View AlaskaGuy's profile

AlaskaGuy

5278 posts in 2697 days


#7 posted 09-06-2016 07:38 AM

Don’t be so foolish as to work without a guard. It’s pretty simple.

-- Alaskan's for Global warming!

View pintodeluxe's profile

pintodeluxe

5934 posts in 3201 days


#8 posted 09-06-2016 03:39 PM

Alaska Guy,
I like the Euro guard. You have to remove the rabbeting ledge for this technique, but the type of guard you suggested would still work just fine.

Thanks for posting.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View jdh122's profile

jdh122

1073 posts in 3205 days


#9 posted 09-06-2016 06:36 PM

You can also just run it through the jointer flipping it each time you run it through. Works fine, might take off a bit more wood (not sure). https://www.youtube.com/watch?v=tvakUFUrOXA
I like AlaskaGuy’s idea for a guard…

-- Jeremy, in the Acadian forests

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com