All Replies on Arts and Crafts Limbert Hall Chair

  • Advertise with us
View willhime's profile

Arts and Crafts Limbert Hall Chair

by willhime
posted 09-05-2016 03:46 AM

5 replies so far

View willhime's profile


161 posts in 2345 days

#1 posted 09-05-2016 03:47 AM

sorry about the picture orientation. They’re all saved right side up but appear like this for some reason when I post

-- Burn your fire for no witness

View nightguy's profile


213 posts in 1468 days

#2 posted 09-05-2016 03:55 AM

I would just leave the seam, can you make it in the center of the width? Only you will notice it I bet!! If noticeable at all when all is said and done. Use TiteBond tinted glue, it dries fairly dark.

View Woodknack's profile


13439 posts in 3186 days

#3 posted 09-05-2016 03:57 AM

The pictures are not right side up even when viewed offline. You probably had your phone orientation wrong when taking them, it’s easy to do.

-- Rick M,

View pintodeluxe's profile


6175 posts in 3619 days

#4 posted 05-08-2018 06:47 PM

In the spirit of antique Limbert furniture, show the wood as it is. That is the best thing about arts and crafts style furniture, it doesn’t try to hide end grain or joint lines. Those are the very things that prove it is real lumber, made with real hands.

If it really bothers you, just cut a slot around the perimeter of the finished part and install an inlay. A slot cutting bit would do the trick.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View Loren's profile


10477 posts in 4454 days

#5 posted 05-08-2018 07:12 PM

Are you concerned about the joint being visible
only around the outside edges or on the inside
of the cutout as well?

The outside edges can routed with a 1/2” wide
groove all around centered on the joint. It
doesn’t have to be very deep, say 3mm. Then
inset a 1/2” wide strip in with glue and trim
away the excess after the glue is dry.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics