All Replies on satin finish

  • Advertise with us
View irish52's profile

satin finish

by irish52
posted 09-03-2016 09:03 PM

3 replies so far

View jumbojack's profile


1691 posts in 3435 days

#1 posted 09-04-2016 04:32 AM

You can use steel wool but I hate the stuff. 400 grit wet/dry sandpaper is my choice. You can be the judge as to the around of satin you like.

-- Made in America, with American made tools....Shopsmith

View nightguy's profile


213 posts in 1474 days

#2 posted 09-04-2016 04:57 AM

If you are happy with the smoothnes then do the steel wool and wax, I am not familiar with Arnor Seal , I use MinWax, with that the steel wool and wax will not take it to a Satin.
I would out a final coat of what ever use used in Satin, Gloss, Semi Gloss, Satin is all the same they just add a light disbursement into it, final coat is all that counts, you could use Satin all the awy and then final coat Gloss and it would be Gloss, and vice versa.

View irish52's profile


22 posts in 2212 days

#3 posted 09-04-2016 06:11 PM

Thank you for the replies jumbojack and nightguy .I think I will wet sand with 400 then apply wax and buff.will post a pic in projects when done

-- youl never walk alone

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics